Code CR1500 User Manual
Hide thumbs Also See for CR1500:

Advertisement

USER MANUAL
CR1500
MANUAL VERSION 04
RELEASE DATE: JULY 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR1500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Code CR1500

  • Page 1 USER MANUAL CR1500 MANUAL VERSION 04 RELEASE DATE: JULY 2018...
  • Page 2: Statement Of Agency Compliance

    The software described in this manual may only be used in accordance with the terms of its license agreement. No part of this publication may be reproduced in any form or by any means without written permission from Code Corporation. This includes electronic or mechanical means such as photocopying or recording in information storage and retrieval systems.
  • Page 3: Table Of Contents

    2.0 - Unpacking....................4 3.0 - Attaching and Detaching a Cable..............5 4.0 - Set Up......................5 5.0 - Using a CR1500 out of a Universal Stand............6 6.0 - Using a CR1500 in a Universal Stand ............6 7.0 - Reading Ranges...................6 8.0 - Reader Feedback..................7 9.0 - Symbologies Defaulted On................7...
  • Page 4: Unpacking

    2.0 - Unpacking CR1500 USB Cable RS232 Cable 5VDC Power Supply D030210_01_CR1500_User_Manual D030210_04_CR1500_User_Manual...
  • Page 5: Attaching And Detaching A Cable

    3.0 - Attaching and Detaching a Cable 4.0 - Set Up Plug In Wait 2 seconds 2 Sec. LED will Flash Reader will beep Reader will vibrate D030210_01_CR1500_User_Manual D030210_04_CR1500_User_Manual...
  • Page 6: Using A Cr1500 Out Of A Universal Stand

    5.0 - Using a CR1500 6.0 - Using a CR1500 out of a Stand in a Stand 10 cm 10 cm 7.0 - Typical Reading Ranges CR1500-KXXX (Standard) CR1500-L2XX (DPM) CR1500-M2XX (XHD) Min Inches (mm) / Max Inches (mm) Min Inches (mm) / Max Inches (mm)
  • Page 7: Reader Feedback

    To turn symbologies on or off, scan the symbology barcodes symbologies that are not enabled by default. To turn located in the CR1500 Configuration Guide located on our- symbologies on or off, scan the symbology barcodes located in website at www.codecorp.com/files.php.
  • Page 8: Reader Id & Firmware Version

    (if there is any) Number <RD><RR MD=”CR1500” /></RD><RD><RR SN=”1060000003” /></RD><RD><FW VS=”1.1.4” /></RD><RD><LC GL=”” /></RD> Note: Code will periodically release new firmware for CR1500 readers. For information on latest firmware visit our website at www.codecorp.com/codesupport.php. 12.0 - CR1500 Overall Dimensions 3.0"...
  • Page 9: Usb Cable Example With Pinouts

    3. Caution: Exceeding the maximum voltage will void manufacturer warranty. BLACK RING SHIELD 15.0 - Reader Pinouts The connector on the CR1500 is an RJ-50 Pin 1 +VIN (5v) (10P-10C). The pinouts are as follows: Pin 2 USB_D- Pin 3...
  • Page 10: Cr1500 Maintenance

    Cleaning the CR1500 Window CR1500 window should be clean to allow the best performance of the device. The window is the clear plastic piece inside the head of the reader. Do not touch the window. Your CR1500 uses CMOS technology that is much like a digital camera. A dirty window may stop the CR1500 from reading barcodes.
  • Page 11: Warranty

    (6) months of the alleged failure. Code’s maximum liability related to its performance, or failure to perform, as described herein shall be limited to the amount paid by Customer for the Code product that is subject to the claim. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages.

Table of Contents