Download Print this page
Code CR1400 Quick Start Manual
Hide thumbs Also See for CR1400:

Advertisement

Reset to Factory Defaults
Reset to USB Factory Defaults
To Detach a Cable
Press a paper clip into the hole on the side of the CR1400 handle, and gently pull
the cable from the reader.
Universal Stand Assembly
(included when ordered as a Kit/Package)
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com
Reset to RS232 Factory Defaults
(801) 495-2200
Reset to Factory Defaults
Reset to USB Factory Defaults
To Detach a Cable
Press a paper clip into the hole on the side of the CR1400 handle, and gently pull the
cable from the reader.
Universal Stand Assembly
(included when ordered as a Kit/Package)
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com
Reset to RS232 Factory Defaults
(801) 495-2200

Advertisement

loading
Need help?

Need help?

Do you have a question about the CR1400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Code CR1400

  • Page 1 To Detach a Cable To Detach a Cable Press a paper clip into the hole on the side of the CR1400 handle, and gently pull the Press a paper clip into the hole on the side of the CR1400 handle, and gently pull cable from the reader.
  • Page 2 CR1400 is ready for use. The blue bars are used for aiming, center the bars in the center of a bar code and The blue bars are used for aiming, center the bars in the center of a bar code and press the trigger to scan.