Subscribe to Our Youtube Channel
Related Manuals for Code CORTEXOPOS CR950
Summary of Contents for Code CORTEXOPOS CR950
- Page 1 CORTEXOPOS ™ USER MANUAL NORTH AMERICA, EMEA, APAC MANUAL VERSION 04 RELEASE DATE: SEP 2020 Products Supported: CR950, CR1000, CR1100, CR1400, CR2700, CR5000, CR6000, CR8000, CR8200 (Limited Support for CR2600) codecorp.com...
- Page 2 Code Corporation. Code Corporation does not warrant that it is accurate, complete or error free. Any use of the technical documentation is at the risk of the user. Code Corporation reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Code Corporation to determine whether any such changes have been made.
-
Page 3: Table Of Contents
Table of Contents 1.0 - Introduction 2.0 - Hardware Requirements 3.0 - Software Requirements 4.0 - CortexOPOS USB Device Types 5.0 - Installation 6.0 - Configuring a Reader for USB Communication 6 7.0 - Configuring a Reader for RS232 Communication 8.0 - Configuring a CR2700 with CRA-A271 Bluetooth Inductive Charging Station 9.0 - CortexOPOS Device Manager ... -
Page 4: Introduction
Code barcode readers to interface with Windows PC applications that use the OPOS standard to communicate with peripherals. By default, the driver installation will create an OPOS device that will work for all USB-connected Code barcode readers. The CortexOPOS installer will also install the CortexOPOS Device Manager. -
Page 5: Installation
OPOS software application should be able to connect to a properly configured device. If a generic device was not created, then the CortexOPOS Device Manager application must be used to configure a Code device for use with OPOS. D008736_04 CortexOPOS User Manual... -
Page 6: Configuring A Reader For Usb Communication
To configure a CR2700 for use with CortexOPOS , first connect the CR2700 to the Bluetooth Inductive Charging Station by scanning the Quick Connect Code located on the front of the Bluetooth Inductive Charging Station. Then scan the following barcode. -
Page 7: Adding A Usb Reader To The Cortexopos Device Manager
10.0 - Adding a USB Reader to the CortexOPOS Device Manager 10.1 Open the CortexOPOS™ Device Manager. 10.2 - Plug a reader into the computer USB port. 10.3 - The Device Manager will detect a connected barcode reader and display the following prompts— select Yes to continue. -
Page 8: Adding An Rs232 Reader (Or Modem) To The Cortexopos Device Manager
® changes. A prompt box will appear asking the user the computer serial port. (Scan the QuickConnect to confirm the changes—press Yes to confirm. Code on the modem.) 11.3 - Select Refresh under Device. Note: All RS232 CortexOPOS™ devices behave as generic devices, and are not tied to any particular reader hardware or serial number. -
Page 9: Using The Microsoft Pos For .Net Sample Application
Microsoft provides the Microsoft Point of Service for .NET or Microsoft POS for .NET library that includes a sample application that can be used with OPOS drivers—including the CortexOPOS™ driver for Code barcode readers—to test communication with OPOS devices. This software can be downloaded from Microsoft at microsoft.com/en-us/download. -
Page 10: Optional Feature Support
13.0 - Optional Feature Support Feature/Capability Support Statement Power reporting Supported as PR_STANDARD Compare firmware Not supported Statistics reporting Not supported Update firmware Not supported Update statistics Not supported Direct IO Not supported D008736_04 CortexOPOS User Manual...
Need help?
Do you have a question about the CORTEXOPOS CR950 and is the answer not in the manual?
Questions and answers