Additional Rs-232 (Serial) Communication Data Bit Settings; Additional Rs-232 (Serial) Communication Baud Rate Settings; Additional Rs-232 (Serial) Communication Parity Settings; Cabled Reader - Time Out Settings - Code CR1200 User Manual

2.2.3.1 - Additional RS-232 (Serial) Communication Data Bit Settings

Scan the following codes to set the appropriate data bit:
7 Data Bits

2.2.3.2 - Additional RS-232 (Serial) Communication Baud Rate Settings

Scan the following codes to set the appropriate baud rate:
1200
19200

2.2.3.3 - Additional RS-232 (Serial) Communication Parity Settings

Scan the following codes to set parity:
Even

2.3.1 - Cabled Reader - Time Out Settings

Scan one of the codes below to set the amount of time a cabled CR1200 will be enumerated before entering sleep mode.
Note: These settings will only work in versions 2098 and above.
Cabled Reader Time Out: 2 hours
Save Settings
2400
38400
Odd
Cabled Reader Time Out: Never (Default)
8 Data Bits (Default)
4800
57600 (Default)
None (Default)
C003525_03_CR1200 User Manual
9600
115200
9