Reset Reader To Factory Defaults; General Safety Information - Code Reader CR3500 User Manual

7.1 - Reset Reader to Factory Defaults

Scan the following codes to reset reader:
Step 1: Reset the Reader
Reset to USB Factory
Default Settings
Reset to RF One Way
Factory Default Settings
-
Step 2: Save Settings
Step 3: Clear All CodeXML Rules
Prefi x & Suffi x

7.2 - General Safety Information

Repairs and Adjustments - Only those individuals authorized by Code should attempt to make repairs or adjustments to
CR3500 equipment. If the reader casing is opened the warranty is voided.
Power Supply - Use only the power supply provided for use with each specifi c reader when operating Code equipment.
Accessories - Only those accessories approved by Code (see page 2) should be utilized with Code equipment.
Non-compliance with any of the above may result in:
• Injury to individuals handling the equipment;
• Damage to the equipment; and
• Voiding of the maintenance contract.
Lithium Ion Battery - Warning: Charge the battery with Code cables ONLY. Do not open battery, dispose of in fi re, or
short circuit - it may ignite, explode, leak, or get hot causing personal injury.
Save Settings
Reset to PS/2 Factory
Default Settings
Bootloader Mode
Bootloader mode is
utilized to download new
version of bootloader
fi rmware.
Clear All Stored Data
Reset to RS-232 (Serial) Factory
Default Settings
Note: If you scan these codes, you
may lose your current settings. Make
sure to save settings on your reader
before scanning the reset codes.
C004387_03_CR3500_User_Manual - 56