Operational Modes; Continuous Read Mode; Read Delays; Duplicate Rejection Period - Code CR1200 User Manual

4.1 - Operational Modes

The CR1200 can operate in either of two modes:
• Triggered (default mode)
• Continuous Read
In Triggered mode, the CR1200 reads a code in response to a trigger press. In Continuous Read mode the CR1200
continuously attempts to read a code without operator intervention. Continuous Read mode includes options to specify
delays between attempts to read and to limit the duplicate readings of the same code.

4.2.1 - Continuous Read Mode

Read the following codes to turn continuous reading on or off:
Continous Scan - On

4.2.1.1 - Read Delays

Read the following codes to set delay time between reads:
0 Seconds (Default)

4.2.1.2 - Duplicate Rejection Period

The Duplicate Rejection Period defi nes a time interval. If a read during this interval duplicates the immediately preced-
ing code, the read will be rejected. Read the following codes to set the delay time before the reader accepts a dupli-
cate code:
0 Seconds (Default)
Save Settings
Continous Scan Off (Default)
1 Second
1 Second
3 Seconds
3 Seconds
C003525_03_CR1200 User Manual 16