Configure The Hotspot Timeouts - Verizon Delphi Connect 4G LTE ACT233L User Manual

Configure the Hotspot Timeouts

The hotspot can be configured to remain on after the engine has been turned off.
When the engine is turned off, the hotspot will remain on for a programmable amount of time
called Shut Off Time. This time ranges from 0 to 30 minutes. If, at the end of Shut Off Time and
anytime thereafter, there are no devices connected to the hotspot, the hotspot will turn off
and remain off until the engine is started. If Shut Off Time is set to 0, then when the engine is
turned off, if no devices are connected to the hotspot, it will shut off immediately. If there is at
least once device connected, the hotspot will remain on. In order to limit the amount of time the
hotspot is enabled after the engine is turned off, an additional time called Force Shut Off Time
begins when the engine is turned off. This time ranges from 0 to 120 minutes. Once the Force
Shut Off Time runs out, the hotspot will turn off regardless if any devices are connected. If
Force Shut Off time is set to 0, then the hotspot will turn off as soon as the engine is turned off,
even if devices are currently connected.
From the Settings menu, tap Account Settings, Module Management, then tap the module you
wish to configure. Tap on Wi-Fi hotspot.
416