Wi-Fi Hotspot; Configure The Network Name (Ssid) And Broadcasting - Verizon Delphi Connect 4G LTE ACT233L User Manual

Wi-Fi Hotspot

Model ACT233L of the Delphi Connected Car System offers you a mobile hotspot in your
vehicle. The hotspot is enabled whenever the engine is running and can be programmed to be
enabled for a period of time after the engine is turned off. You can have a maximum of five
devices connected to the hotspot at one time.

Configure the Network Name (SSID) and Broadcasting

From the Settings menu, tap Account Settings, Module Management, then tap the module you
wish to configure. Tap on Wi-Fi hotspot.
Note: If the module has a cellular connection and the Wi-Fi hotspot is on and connected to at least one device,
the ability to send FOB commands over Bluetooth will be disabled. All FOB commands will be sent over the
cellular network.
Note: After modifying the Wi-Fi hotspot settings, the hotspot will turn off for a few moments and then turn
back on.
411