Key Fob Pairing - Verizon Delphi Connect 4G LTE ACT233L User Manual

Key Fob Pairing

The key fob setup process has two main steps, configuring your module for your vehicle and
pairing your module with your vehicle. You can perform the configuration step at any time from
either the smartphone app or the website. To complete the pairing step you will need to be in
your vehicle. It is necessary to perform this step in your vehicle because you may be prompted
at times to turn your ignition key and press specific vehicle buttons. Following the successful
set up of your key fob, you will be able to use the smartphone app to send key fob commands to
your vehicle in the same manner as you would with your original key fob. In addition, you can use
the Delphi Connect website to send key fob commands as well.
Note: While the Delphi Connect system currently supports most remote start systems that
came from the manufacturer, you can check if your remote start feature is supported. Refer
to the fitment guide at connectedcar.delphi.com/fitment. For vehicles that require a sequence
of buttons to be pressed to perform a remote start, you only need to press the Remote Start
button once. The module will automatically provide any button sequence required to start the
vehicle.
Note: You will only need to pair the key fob using the Delphi Connect app or website one time.
After the initial pairing, the key fob capability will be available from either location.
Note: The key fob setup should be only performed when all key fobs are present. If you do this
with only one present it may de-program your secondary key fobs.
Before attempting the key fob setup process, look on your dashboard view to see if your
vehicle's VIN has been identified. If the module was able to read your vehicle's VIN, you will see
it displayed at the top of the screen below your vehicle name. If the module was unable to read
your vehicle's VIN, your vehicle will be identified by the word Vehicle followed by a number. If
your VIN is not available, see section Key Fob Setup without VIN. You can also edit your vehicle
information and provide either the VIN or the Make, Model, and Model Year of your vehicle prior
to fob setup. See section Edit Your Vehicle Information.
106