Replacing The Batteries; Cleaning Your Meter And Maintenance - Infopia Evolution Operation Manual

Cleaning Your Meter and Maintenance

Meter
Your meter does not require special maintenance or cleaning. avoid getting dirt,
dust, blood, glucose control solution, or liquids on the blood glucose test meter,
the test port, or data port. Your blood glucose test meter operation temperature
is 10℃~40℃(50℉〜104℉).
It is recommended that you store the meter in its carrying case after each use.
A cloth dampened with water and mild detergent can be used to wipe down the
outside of the blood glucose test meter. Your EVOLUTION
meter is a precision instrument. Please handle it with care.
Lancet Device:
Clean the lancet device and caps with soap and tepid water. To disinfect the
lancet device, prepare a disinfectant solution of one part household bleach to 10
parts water. Dampen a cloth with this solution and wipe the lancet device thor-
oughly. Soak only the cap for at least 30 minutes in the disinfectant solution. Do
not soak the lancet device in liquid. Rinse the lance device and cap with water
and dry thoroughly.
•For detailed instructions concerning EVOLUTION
refer to the test strip package insert found in the blood glucose test strip box.
•Please store the EVOLUTION
TM
dry area, out of reach of children. Do not freeze. For a more accurate test
result avoid testing under direct sunlight.
•Do not soak the blood glucose test meter or blood glucose test strips in water
or liquid.
•Do not subject the blood glucose test meter or blood glucose test strips to
excessive heat.
•Use your blood glucose test meter according to the instructions in the manual.
•If you need to purchase the lancing device, lancets or blood glucose test
strips, contact your local representative.
•Discard the used Lancets carefully, to prevent any infection.
34
www.infopia21.com
TM
blood glucose test
TM blood glucose test strips,
blood glucose monitoring system in a cool,

Replacing the Batteries

The low battery icon will appear in the upper left corner of the LCD
screen to alert you when the battery power is running low, indicating a
new battery is needed.
TM
Your EVOLUTION blood glucose test meter uses only two 3V
Lithium batteries (CR2032), which are included. When replacing the
batteries, only CR2032 or equivalent lithium battery should be used.
After changing the batteries, please be sure to recheck your meter
settings.
<Follow-up Action>
1. Check your meter with the glucose control solution (p16-17)
2. Perform your test again (p20 - 22)
3. If you are experiencing symptoms that are not consistent with your
blood glucose test results, call your healthcare professional.
CAUTION
Remove both batteries from the battery compartment and dispoes of
them according your institution's guidelines.
⊕⊕
35