Testing Your Blood - Case Of Setting User Option And Id - Infopia Evolution Operation Manual

Testing Procedure
Step 3
•After beeping sound, the test will begin automatically and your results
will appear in 3 seconds. It should begin counting down from 3 to 1
second on the LCD window. The LCD window will display the result
of your blood glucose level, including temperature and time.
•Record the result value in your EVOLUTION
pull out the blood glucose test strip, the meter turns off automatically.
CAUTION
1. If the test result is out of the test range, the Hi/Lo message will be shown on the
LCD window. (refer to p35)
2. Safely discard used blood glucose test strips and lancets.
24
www.infopia21.com
TM logbook. When you
Testing Your Blood - Case of Setting User Option
and ID
Step 4-1
•If you selected to use the User Activity
option during set up, press ▲ and ▼
button to select the activity that corre-
lates with your result (refer to p10), then
press
•If you do not select to use user activity
option during set up, press
ue to step 4-2.
Step 4-2
•If you selected to use the User ID
option during setup, press ▲ and ▼
button to select the correct User ID,
then press
CAUTION
1. If you did not activate the User Activity option and/or the User ID option, Step
4-1 and/or Step 4-2 procedures are not conducted.
2. Although User Activity option and/or User ID option are activated, if you pull
the blood glucose test strip out right after the test, you can not move onto
step 4, The test result is stored, not under a specific User ID and only
displayed after deactivating the User Id option.
3. Please refer to page 13, if you want to set the User Activity option and User
ID option.
.
to contin-
.
25