Testing Your Blood - Case Of Setting User Option And Id - Infopia Element Lite Instructions For Use Manual

Testing Procedure
Step 3
• After beeping sound, the test will begin automatically and your results will
appear in 3 seconds. It should begin counting down from 3 to 1 second on
the LCD window. The LCD window will display the result of your blood
glucose level, including temperature and time.
• Record the result value in your Element
blood glucose test strip, the meter turns off automatically.
CAUTION
1. If the test result is out of the test range, the Hi/Lo message will be
shown on the LCD window. (refer to p37)
2. Safely discard used blood glucose test strips and lancets.
24
www.infopia21.com
®
Lite logbook. When you pull out the
Testing Your Blood -
Case of Setting User Option and ID
Step 4-1
• If you selected to use the User Activity option
during set up, press
the activity that correlates with your result (refer
to p10), then press
• If you did not select to use user activity option
during set up, press
Step 4-2
• If you selected to use the User ID option during
setup, press
correct User ID, then press
CAUTION
1. If you did not activate the User Activity option and/or the User ID option,
Step 4-1 and/or Step 4-2 procedures are not conducted.
2. Although User Activity option and/or User ID option are activated, if you
pull the blood glucose test strip out right after the test, you can not move
onto step 4, The test result is stored, not under a specific User ID and
only displayed after deactivating the User ID option.
3. Please refer to page 13, if you want to set the User Activity option and
User ID option.
and button to select
.
to continue to step 4-2.
and button to select the
.
25