Changing The Default Temperature Unit - AEMC 401 User Manual

2. To change the threshold, press the
flashes; each press on the
To record the chosen threshold, apply a long press (>2s) on the
(yellow) button. A confirmation beep is emitted.
When the desired value is displayed, turn the switch to another setting. The
chosen threshold is stored and a double beep is emitted.
NOTE: The starting (InRush) current measurement triggering threshold is fixed at
1% of the least sensitive range. This value is 1% of 99.99A or 1A. This threshold
is not adjustable.
3.4.4

Changing the Default Temperature Unit

To program the measurement unit, °C or °F:
1. In the OFF position, hold the
the switch to
emitted. The display will indicate the currently assigned unit (°C or °F).
The default unit is °C.
2. Pressing the
When the desired unit is displayed, turn the switch to another setting. The unit
chosen is stored and a double beep is emitted.
NOTE: Pressing the
measurement will toggle between °C and °F.
(yellow) button displays the next value.
until the "full screen" display ends and a beep is
(yellow) button toggles between °C and °F.
(yellow) button during an active temperature
20
(yellow) button. The value
(yellow) button down while turning