Operating Your Generator - Hyundai HY2000sei User Manual

OPERATING YOUR GENERATOR

Before using generator, a ground wire must be connected to the ground
terminal. The Ground terminal is located on the Front Panel. Before using the
ground terminal consult a qualified electrician.
20
X
HY2000si and HY2800sei User Manual
1. Disconnect all devices from the generator.
2. Open the fuel valve by turning the fuel valve knob from "off"
to "on". Make sure the valve is turned all the way, to ensure
that the valve has been fully opened for fuel to pass through.
3. Turn choke to "closed" or OFF position. Leave the choke
in the "Open" position if the generator is still warm from
recent use, or if the air temperature is higher than
50°F (10°C).
4. Locate and press primer bulb 15-20 times to move fuel
through the lines and into the engine.
Note: This step is only necessary when the engine
is cold
13