Understanding The Amplifi Er Lights - Wilson Electronics 271245 Installation Manual

Understanding the Amplifi er Lights
The power light PWR will turn green
when the amplifi er is successfully
powered up.
When the 800 MHz or 1900 MHz lights
are lit green, the amplifi er is amplifying
the outside signal.
If one or both frequency lights turn red,
the amplifi er is oscillating. To correct
this, you must increase the separation
between the inside and outside antennas
until all lights are green. After increasing
the separation, it is necessary to turn the
amplifi er power off and back on to reset
the red lights. If one or both frequency
lights remain red, repeat this procedure
until both are green.
8