Table of Contents
Advertisement
Quick Links
Amplifier
Amplifier
Installation
Installation
Installation
Guide
Guide
Contents:
Before Getting Started / How It Works · · · · · · · · · · · · · 1
Antenna Options and Accessories · · · · · · · · · · · · · · · · 1
Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Installation Diagram · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Installing a Wilson Amplifi er · · · · · · · · · · · · · · · · · · · · 3
Powering Up a Wilson Amplifi er · · · · · · · · · · · · · · · · · · 4
Understanding the Amplifi er Lights · · · · · · · · · · · · · · · · 4
Warnings and Recommendations · · · · · · · · · · · · · · · · 5
Finding Signal Strength and Coverage Distance · · · · · · 5
Amplifi er Specifi cations · · · · · · · · · · · · · · · · · · · · · · · 6
Guarantee and warranty · · · · · · · · · · · · · · · · Back Cover
In-Building
Dual Band
Wireless
Cellular
Amplifi er
!
Warning: This manual contains
important safety and operating information.
Please read and follow the instructions
in this manual. Failure to do so could be
hazardous and result in damage to your
amplifi er.
Wilson
®
Electronics, Inc.
Advertisement
Table of Contents
Related Manuals for Wilson Electronics 271247-75
Summary of Contents for Wilson Electronics 271247-75
-
Page 1: Table Of Contents
Amplifier Amplifier Installation Installation Installation Guide Guide In-Building Dual Band Wireless Cellular Amplifi er Contents: Before Getting Started / How It Works · · · · · · · · · · · · · 1 Antenna Options and Accessories · · · · · · · · · · · · · · · · 1 Installation Overview ·... -
Page 2: Before Getting Started / How It Works
Installation Instructions for the Following Wilson Amplifi ers: DB In-Building Wireless Cellular Smart Technology™ Amplifi er Model # 271247-75 FCC ID: PWO271247ASB IC: 4726A-271247ASB The term “IC” before the radio certifi cation number only signifi es that Industry Canada technical specifi cations were met. -
Page 3: Installation Overview
EASY TO INSTALL Wilson Electronics designs and manufactures a full range of wireless amplifi ers for in-building applications. The following steps provide a summary of the amplifi er/antenna installation process. However, they are not a substitute for the complete installation instructions on the following pages, which you should read thoroughly. -
Page 4: Installing A Wilson Amplifi Er
Power Supply Users Connect the outside antenna to the amplifi er with low loss coax cable (available from Wilson Electronics). Place the inside antenna in the center of the area needing the amplifi ed signal. Warning: Connecting the amplifi er directly to the cell phone with use of an adapter will damage the cell phone. -
Page 5: Powering Up A Wilson Amplifi Er
Powering up a Wilson Amplifi er Ensure that all cell phones and cellular data cards within 50 feet IMPORTANT! of the inside antenna are turned off. 2. To verify proper installation of the amplifi er and antennas, make sure that the distance between the inside and outside antennas is a minimum of 50 feet of separation. -
Page 6: Warnings And Recommendations
Warnings and Recommendations Warning: The Yagi antenna must always be located so the back or side points to the inside antenna. Never point the front of the Yagi antenna toward the inside antenna – oscillation will result, causing amber light and gain reduction. -
Page 7: Amplifi Er Specifi Cations
Amplifi er Specifi cations Dual-Band Wireless 800/1900 MHz Specifi cations Model Number 271247-75 Outside antenna connectors F Female Outside antenna impedance 75 ohms Inside antenna connectors F Female Inside antenna impedance 75 ohms Dimensions 6.2 x 4.2 x 1.5 inch (15.7 x 10.7 x 3.8 cm) Weight 0.64 lbs (0.29 kg) - Page 8 Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer.