Advertisement
Quick Links
Amplifier
Installation
Guide
Contents:
Before Getting Started / How It Works · · · · · · · · · · · · ·
Antenna Options and Accessories · · · · · · · · · · · · · · · ·
Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · ·
Installation Diagram · · · · · · · · · · · · · · · · · · · · · · · · · ·
Installing a Wilson Amplifier · · · · · · · · · · · · · · · · · · · ·
Powering Up a Wilson Amplifier · · · · · · · · · · · · · · · · · ·
Understanding the Amplifier Lights · · · · · · · · · · · · · · · ·
Warnings and Recommendations · · · · · · · · · · · · · · · ·
Finding Signal Strength and Coverage Distance · · · · · · 5
Amplifier Specifications · · · · · · · · · · · · · · · · · · · · · · ·
Guarantee and warranty · · · · · · · · · · · · · · · ·
In-Building
Dual Band
Wireless
Cellular
Amplifier
!
Warning: This manual contains
important safety and operating information.
Please read and follow the instructions
in this manual. Failure to do so could be
hazardous and result in damage to your
amplifier.
1
1
2
2
3
4
4
5
6
Back Cover
Wilson
®
Electronics, Inc.
Advertisement
Related Manuals for Wilson Electronics 271247-75
Summary of Contents for Wilson Electronics 271247-75
- Page 1 Amplifier Installation Guide In-Building Dual Band Wireless Cellular Amplifier Contents: Before Getting Started / How It Works · · · · · · · · · · · · · Antenna Options and Accessories · · · · · · · · · · · · · · · · Installation Overview ·...
- Page 2 Installation Instructions for the Following Wilson Amplifiers: DB Pro In-Building Wireless Cellular Smart Technology™ Amplifier Model # 271247-75 FCC ID: PWO271247ASB IC: 4726A-271247ASB The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
- Page 3 EASY TO INSTALL Wilson Electronics designs and manufactures a full range of wireless amplifiers for in-building applications. The following steps provide a summary of the amplifier/antenna installation process. However, they are not a substitute for the complete installation instructions on the following pages, which you should read thoroughly. Contact Wilson’s Technical Support Department with any questions at 866-294-1660.
- Page 4 Installing a Wilson Amplifier Select a location to install the amplifier that is away from excessive heat, direct sunlight, moisture and that has proper ventilation. Do not place the amplifier in an air-tight enclosure. Recommended installation locations for in-building amplifiers are: •...
- Page 5 Powering up a Wilson Amplifier IMPORTANT! Ensure that all cell phones and cellular data cards within 50 feet of the inside antenna are turned off. 2. To verify proper installation of the amplifier and antennas, make sure that the distance between the inside and outside antennas is a minimum of 50 feet of separation.
- Page 6 Warnings and Recommendations Warning: The Yagi antenna must always be located so the back or side points to the inside antenna. Never point the front of the Yagi antenna toward the inside antenna – oscillation will result, causing amber light and gain reduction.
- Page 7 Amplifier Specifications Dual-Band Wireless 800/1900 MHz Specifications Model Number 271247-75 Outside antenna connectors F Female Outside antenna impedance 75 ohms Inside antenna connectors F Female Inside antenna impedance 75 ohms Dimensions 6.2 x 4.2 x 1.5 inch (15.7 x 10.7 x 3.8 cm) Weight 0.64 lbs (0.29 kg)
- Page 8 Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer.