Sharp MX-2615N Configuration Manual page 50

Step 1: chooSe paper feed configuration
MX-SL10 (optional)
Status Indicator can be
A
added to any configuration.
MX-M904/M1054/M1204
B
* The MX-MFX1 is required
if no other paper feed options
are selected.
1. Base Unit 2. MX-LC12
Supported Paper Weights
1. Base Unit
Upper Drawer (tandem): 16 lb. Bond to 28 lb. Bond
Middle/Lower Drawer: 16 lb. Bond to 100 lb. Bristol
2. MX-LC12
16 lb. Bond to 100 lb. Bristol
3. MX-LC13
Upper/Lower Drawer: 15 lb. Bond to 110 lb. Cover
Supplies & Accessories
• Toner Cartridge
• Developer
• Drum
• Waste Toner Bottle
© 2013 Sharp Electronics Corporation. All rights reserved.
mX-m904/m1054/m1204
and
MX-MFX1* MX-LC12
100-sheet Large Capacity
Multi Bypass Cassette
Tray (Letter)
and
and
MX-RB16 MX-LC13
LCT Mounting Large Capacity Tray
Kit (2 Drawers; Ledger)
3. MX-LC13
MX-900NT
MX-900NV
MX-850NR
MX-850HB
or
MX-LCX3N
Large Capacity
Cassette
(Ledger)
*Available only on MX-M904.
MX-MF11
500-sheet
Multi Bypass Tray
(not required)
and and
MX-RB17 MX-LC13
LCT Connecting Large Capacity Tray
Kit (required for (2 Drawers; Ledger)
2nd MX-LC13) (not required)
4. MX-LCX3N
4. MX-LCX3N
16 lb. Bond to 100 lb. Bristol
5. MX-MFX1
15 lb. Bond to 110 lb. Cover
6. MX-MF11
15 lb. Bond to 100 lb. Bristol
• 1 20V/15A Power Filter (for MX-FN21,
MX-FN22, MX-LC13, and MX-ST10)
• 2 08-240V/20A Power Filter
(for MX-M904/M1054/M1204)
configuration chart
Configuration A
A These configurations require the
MX-MFX1. The MX-LC12 cannot
be used with the MX-LCX3N. The
MX-LCX3N is available only on the
MX-M904. These items cannot be
combined with items from paper
feed configuration B.
Configuration B
B This configuration requires the
MX-RB16 and MX-LC13. An MX-RB17
is required to connect two MX-LC13
Large Capacity Trays. The MX-MF11
can also be added to the first MX-LC13,
but cannot be used alone. These items
cannot be combined with items from
paper feed configuration A.
5. MX-MFX1 6. MX-MF11
AR-D5133NT
MX-E524ZNT
50