Product Con guration
Space Requirements and Planning Guide
Allow at least 20-1/8" for depth of unit.
Plan ahead and make sure your installation is a great success!
Remember to check the latest information on these products
and make sure that the following items are available prior
Verify power dedication and check for power stability.
The MX-C300P Printer requires AC 120V, 60Hz power source.
This device draws 9 amps (Requires 15A circuit breaker)
Con rm that you have the latest rmware available
to upgrade the MX-C300P immediately.
Make sure the customer has enough supplies on-hand to
do a large rush job. After-hours printing and/or holiday
work may take place immediately following an installation.
Black Toner Cartridge
Cyan Toner Cartridge
Magenta Toner Cartridge
Yellow Toner Cartridge
Check to see if My Sharp™ online training is set up for
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, NJ 07495-1163
1-800-BE-SHARP • www.sharpusa.com
© 2014 Sharp Electronics Corporation. All rights reserved.
500-sheet Paper Tray
Base Unit + MX-CS11
Design and specifications subject to change without notice. Sharp and My Sharp are trademarks or registered trademarks
of Sharp Corporation and/or its affiliated companies. All other trademarks are the property of their respective owners.
M X - C 3 0 0 P
Base Unit + MX-25ABD
Approximate Dimensions with Tray and Cover Open
MX-C300P shown with MX-25ABD
to open cassette
For complete installation procedures please contact your Authorized Sharp servicing dealer.
Copier Stand with Door
(w) x 19-1/3
(d) x 25
13 - 1/4"
38 - 1/4"
to open Bypass Tray