Space requirementS and planning guide
Note: In addition to the above dimensions, allow three feet of space on all sides for consumable replenishment,
paper jam removal, and maintenance and service procedures. Images may not be to scale.
Read this document in its entirety before planning your configuration.
Plan ahead and make sure your installation is a great success! Remember
to check the latest information on these products and make sure that the
following items are available prior to installation.
• V erify dedicated power source and check for stability. The MX-M904/
M1054/M1204 Document Systems require a 208-240 VAC, 60 Hz, 20
Amp power source.
The MX-M904/M1054/M1204 main unit requires one 208-240
VAC, 20 Amp power source plug
The MX-FN21, MX-FN22, MX-LC13, and MX-ST10 options
each require separate 120 VAC, 15 Amp power source plugs.
• C onfirm that you have the latest firmware available from
www.sharp-pcservice.com to upgrade your MX-M904/M1054/M1204
Document Systems immediately.
• S ome accessories require a product key for operation. You should obtain
the accessory Application Code and machine's serial number to register
the product key online prior to arrival at the customer location.
• C heck to see if My Sharp™ online training is set
up for the end-user.
• V erify that the customer has enough supplies on-hand to complete
a large rush job. After-hours printing and/or holiday work may take
place following an installation. See Supplies & Accessories list on
the following page.
Illustrations shown are for measurement purposes only and may not be to
scale. For configurations see subsequent pages.
Design and specifications are subject to change without notice. All product
dimensions listed are approximate. Sharp, Sharp OSA, My Sharp and all related
trademarks are trademarks or registered trademarks of Sharp Corporation and/or
its affiliated companies. PCL is a registered trademark of HP Company. Adobe and
PostScript are registered trademarks of Adobe Systems Inc. GBC is a registered
trademark of ACCO Brands. All other trademarks are the property of their
© 2013 Sharp Electronics Corporation. All rights reserved. 03/13
L Height from platen glass
with document feeder open
Measurements for MX-FN21, MX-FN24, MX-FN25, MX-SL10, and MX-MFX1, MX-LC12, MX-LCX3N.*
Depth Measurements (overhead view).*
Measurements for GBC SmartPunch™ Pro and Plockmatic Booklet Maker System.*
with operation panel