Basic Functions; On/Off Function; Initialization; Change Password - GPS Tracker TK-104 User Manual

lighter.
Note: The tracker is being charged if the LED is red constantly during the charge,
and charging is finished when the LED change from red to green, and then you
can stop charging.
III.

Basic functions

Note: You don't need to type "+" for all the command in this manual,
"space" means press the space button on the cell phone keyboard.

1. ON/OFF Function

1.1
In the OFF state, switch ON/OFF to ON position, then the three LED will bright flash 1 time, which
means the tracker had been switched on.

2. Initialization

Send SMS "begin+password" to tracker from your cell phone, it will reply "begin
ok" and return to the default factory settings state. (Default password is: 123456).
For example: Send SMS "begin123456" to tracker, it will reply "begin ok".

3. Change Password

Send SMS "password+old password+space+new password" to the tracker from
your cell phone to change the password. For example: Send SMS "password123456
888888" to tracker, it will reply "password OK", and it means the password has
changed successfully. And please keep the new password in mind.
Note: The new password must be 6 digits, or the tracker can't recognize.

4. Add and Delete Authorization

4.1 Authorization phone number is the phone number you used for tracking,
controlling, alarms, etc, and only 5 phone numbers to be allowed to authorized in
the tracker at most. Add authorization as following two ways:
4.2 For the first authorization, Call and track the tracker device for 10 times from cell
phone in success, it will make the cell phone number as the authorized number
automatically, and reply "add master ok"
4.3 Authorization: Send SMS "admin+password+space+cell phone number" to set up an
authorized number, the other authorized numbers should be set by the first authorized
number, if the number is successfully authorized, the unit will reply" admin OK" .
If you need to track the target tracker device when it enters into another country, you must
add the country code before the cell phone number, for example, send SMS" admin123456
008613322221111" to the device. Note: 13322221111 will be set up as the
.
7