Selecting Watch Points - Bosch 2212 User Manual

Selecting Watch Points

Once you've decided how your system will respond to watched points
(see Selecting Watch Tone), you need to decide which of the points in
your system are to be watched. Use this feature to tell your system
which points to watch. You cannot watch fire points.
Choosing which points to watch depends upon your goals. If you have
small children, you may choose to watch points of entry and exit. Each
time a watch point is faulted (door or window is opened) the keypad
responds as programmed. For example, you may tell your system to
produce a short beep when a watch point is faulted.
If you just want to review (not change) current watch point settings,
press [8]. The display scrolls the current setting for each point.
1. Make sure that your system is off (On light is off).
2. Press [8] and enter your passcode. The display shows the points
that are currently being watched (Watch On) and those that are
not (Watch Off), followed by instructions for changing the
current setting. The example below shows that watch is off for
Point 2:
PT 2 WATCH OFF
FRONT DOOR
PRESS
TURN PT 2 ON
Follow the displayed instructions to change the current setting.
In this case, to make Point 2 a watch point you would press [2]
[ ]. The display confirms your choice:
PT 2 WATCH ON
FRONT DOOR
3. The display continues to scroll the remaining points. You may
continue to select or deselect as many watch points as are
available. When finished, press [CLEAR] to return to the off
state.
TO
21