Bosch 2212 User Manual page 37

CODE # OWNER
CODE # USER
CODE CHANGED
CODE NOT CHANGED
ENTER CODE
ENTER CODE TO
TURN SYSTEM OFF
ENTER CODE TO
SILENCE ALARM
ENTER CODE TO
SILENCE BELL
ENTER CODE TO
START TEST
ENTER NEW AGAIN
ENTER NEW CODE
ENTER OLD CODE
ENTER OWNER CODE
TO MODIFY CODES
ENTER OWNER CODE
TO CHANGE POINTS
## sec to exit !
## SEC TO EXIT !
[#] PTS BYPASSED
FOR NO DELAY
PRESS 9
FOR NO DELAY
PRESS 0
Indicates the passcode is an Owner
type.
Indicates the passcode is a User type.
Indicates the passcode has been
changed.
Indicates the attempt to change the
passcode was unsuccessful.
This display is shown when a
passcode is being entered.
Prompt to enter your passcode to
turn the system off.
Prompt to enter your passcode to
silence an alarm.
Prompt to enter a passcode to silence
the alarm bell.
Prompt to enter a passcode to start
the system test.
Prompt to enter your new passcode
again.
Prompt to enter your new passcode.
Prompt to enter your current
passcode.
Prompt to enter an Owner type
passcode to change passcodes.
Prompt to enter an Owner type
passcode in order to change watch
points.
Displayed during exit delay to show
how much time remains before the
system turns on.
Indicates the system is turned on
with points bypassed.
Prompt to press [9] to turn system
All On with No Delay.
Prompt to press [0] to turn system
Part On with No Delay.
37