Miscellaneous Scanner Parameter Defaults - Motorola Symbol DS6607 Product Reference Manual

11-4 Symbol DS6607 Product Reference Guide

Miscellaneous Scanner Parameter Defaults

Table 11-1 lists the defaults for miscellaneous scanner options parameters. There are two ways to change the default values:
• Scan the appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the
default parameter values, scan the
• Download data through the device's serial port using SSI. Hexadecimal parameter numbers are shown in this chapter below
the parameter title, and options are shown in parenthesis beneath the accompanying bar codes. See the Simple Serial
Interface (SSI) Programmer's Guide for detailed instructions for changing parameters using this method.
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Note
Transmit Code ID Character
Prefix Value
Suffix 1 Value
Suffix 2 Value
Scan Data Transmission Format
FN1 Substitution Values
Transmit "No Read" Message
*Set All Defaults
Table 11-1. Miscellaneous Scanner Options Default Table
Parameter
bar code on page 4-5.
for all user preferences, hosts, symbologies, and
Parameter
Number Default
2Dh None
63h, 69h 7013 <CR><LF>
62h, 68h 7013 <CR><LF>
64h, 6Ah
EBh Data as is
67h, 6Dh Set
5Eh Disable
Page
Number
11-5
11-6
11-6
11-7
11-8
11-9