Beeper Definitions - Motorola Symbol DS6607 Product Reference Manual

2-4 Symbol DS6607 Product Reference Guide

Beeper Definitions

The digital scanner issues different beep sequences and patterns to indicate status.
during both normal scanning and while programming the digital scanner.
Beeper Sequence
Standard Use
Low/medium/high beeps
Short high beep
4 long low beeps
5 low beeps
Lo/hi/lo beeps
Hi/hi/hi/lo beeps
Parameter Menu Scanning
Lo/hi beeps
Hi/lo beeps
Hi/lo/hi/lo beeps
Code 39 Buffering
Hi/lo beeps
3 long high beeps
Lo/hi/lo beeps
Lo/hi beeps
Macro PDF
2 long low beeps
3 long low beeps
4 long low beeps
5 long low beeps
Fast warble beep
Lo/Hi beeps
ADF Programming: Normal Data Entry. Duration of tones are short.
Hi/Lo beeps
Lo/Lo beeps
Hi/Hi beeps
Hi/Lo/Hi/Lo beeps
Hi/Lo/Lo beeps
Low beep
Lo/Hi/Hi beeps
Table 2-1. Beeper Definitions
Power up.
A bar code symbol was decoded (if decode beeper is enabled).
A transmission error was detected in a scanned symbol. The data is ignored. This occurs if the digital scanner is not
properly configured. Check option setting.
Conversion or format error.
ADF transmit error. See Chapter 12, Advanced Data
RS-232 receive error.
Input error; incorrect bar code, programming sequence, or Cancel scanned.
Keyboard parameter selected. Enter value using numeric bar codes.
Successful program exit with change in parameter setting.
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
The Code 39 buffer was erased or there was an attempt to clear or transmit an empty buffer.
A successful transmission of buffered data.
File ID error. A bar code not in the current MPDF sequence was scanned.
Out of memory. There is not enough buffer space to store the current MPDF symbol.
Bad symbology. Scanned a 1D or 2D bar code in a MPDF sequence, a duplicate MPDF label, a label in an incorrect order,
or trying to transmit an empty or illegal MPDF field.
Flushing MPDF buffer.
Aborting MPDF sequence.
Flushing an already empty MPDF buffer.
Enter another digit. Add leading zeros to the front if necessary.
Enter another alphabetic character or scan the End of Message bar code.
Enter another criterion or action, or scan the Save Rule bar code.
Rule saved. Rule entry mode exited.
All criteria or actions cleared for current rule, continue entering rule.
Delete last saved rule. The current rule is left intact.
All rules are deleted.
Table 2-1 defines beep sequences that occur
Indication
Formatting.