Troubleshooting - Sharp IG-BC2E Plasmacluster Ion Operation Manual

TROUBLESHOOTING

Problem
The Plasmacluster Ion Generator
does not work.
Flashing
faster (red)
UNIT
Flashing (red)
UNIT
A discontinuous noise is heard.
A clicking or ticking sound
comes from the unit.
The air fl ow decreases.
The discharged air has odor.
•
•
It is over the exchange period of Plasmacluster
FILTER
Ion Generating Unit.
CLEAN
Replace with new Plasmacluster Ion Generating
UNIT
Unit. (See E-9)
Plasmacluster Ions are not released.
Press the Mode Button and restart.
Flashing (blue)
Failure
Unplug and contact the store you purchased or
Sharp Service Center.
Flashing (blue)
• Clicking or ticking sounds may be audible when
• Dust may block the fi lter, clean the fi lter.
• Wind quantity sometimes becomes strong
• Filter is getting dirty.
• The Plasmacluster Ion Generator releases a
WHAT TO DO
Is a Car Adapter connected properly?
Please be connected defi nitely.
Does not a fuse blow?
Replace with a new fuse. (See E-10)
If all lights keep fl ashing, replace with new
Plasmacluster Ion Generating Unit.
the unit is generating ions.
(See E-8)
during operation with LOW mode, to confi rm
the condition of ion be not abnormal.
Clean the fi lter. (See E-8)
small trace of ozone which may produce odor.
This is not detrimental to health.
E-11