Related Manuals for Sharp Plasmacluster IG-A10J-B
Summary of Contents for Sharp Plasmacluster IG-A10J-B
- Page 1 Plasmacluster Ion Generator OPERATION MANUAL Plasmacluster is trademarks of SHARP Corporation. IG-A10J-W IG-A10J-R IG-A10J-B Read and keep this manual carefully.
- Page 2 O) which returns to the air. Testing and venfication Organization. -compliant test facilities have gathered highly *1 Ishikawa Health Service Association. reliable safety data on Sharp's Plasmacluster *2 Retroscreen Virology, Ltd, UK. technology. *3 Hiroshima University. •Skin irritation/corrosion test *4 Japan Spinners Inspecting Foundation.
-
Page 3: Table Of Contents
• While IG-A10J can inactivate and eliminate suspended viruses and other contaminants, it cannot create a completely sterile envi- ronment. SHARP does not guarantee its ability to prevent micro- bial infection. • To enable stable emission of high-density Plasmacluster ions, the... -
Page 4: Important Safety Instructions
• DO NOT use the unit near gas appliances or fireplaces. • If the power cord is damaged, it must be replaced by the manufacturer, a Sharp Approved Ser- vice Centre or a qualified person in order to avoid a hazard. -
Page 5: Parts Name
PARTS NAME FRONT Louvres DISPLAY (See E-4) Unit Replacing Top Cover Cap Light (red) (See E-6) Screws High (blue) Air outlet Top Cover Operation (blue) Plasmacluster Ion Button Fan Speed Generating Unit Indicators (See E-6,7) Filter (Air Intake) Filter (Air Intake) (See E-5) BACK Use a pointed object, e.g a pen tip, to press... -
Page 6: Installation Position
INSTALLATION POSITION Place the main unit on a smooth, DO NOT USE the below items near the unit. stable surface in a room and silicone-containing products* insert the plug into an outlet. DO NOT carry the unit by holding the louvres. SPRAY PESTICIDES Installation Guidance. -
Page 7: Cleaning And Maintenance
CLEANING AND MAINTENANCE WARNING: When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result. Main Unit Every month or more often if necessary Wipe with a dry soft cloth. -
Page 8: Plasmacluster Ion Generating Unit Replacement
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT In order to release Plasmacluster Ions stably, it is necessary to periodically replace the Ion Generating Unit. The Unit Replacing Light will be ON as a reminder for replacement. Display Message Elapsed Time Beginning to use lighting (blue) approx. -
Page 9: How To Replace The Plasmacluster Ion Generating Unit
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT *When replacing the Plasmacluster Ion Generating Unit, be sure to turn off the main unit, unplug the power cord, and never handle the plug with wet hands. Remove the LOUVRES. Remove the TOP COVER CAP. -
Page 10: Specifications
Dust may block the filter, clean the filter. flashing (blue) Failure Unplug and contact the store you purchased the unit from, or a Sharp Approved Service Centre. flashing (blue) The discharged air has odour. The Plasmacluster Ion Generator releases a small trace of ozone which may produce odour. - Page 11 If you still require service, contact your SHARP Approved Service Centre. SHARP Approved Service Centre locations can be found in the support area of our website: Australia : http://www.sharp.net.au New Zealand : http://www.sharp.net.nz...
- Page 12 SHARP CORPORATION OF AUSTRALIA PTY.LTD. A. B. N. 40 003 039 405 1 HUNTINGWOOD DRIVE, HUNTINGWOOD, N.S.W. 2148 P.O.BOX 6827, BLACKTOWN. N.S.W. 2148 www.sharp.net.au SHARP CORPORATION OF NEW ZEALAND LIMITED 59 HUGO JOHNSTON DRIVE, PENROSE, AUCKLAND www.sharp.net.nz Printed in China TINS-A359KKRZ 09K-...