Wpa-Psk - iBall Baton iB-WRB300N User Manual

300M MIMO Wireless-N Router
(iB-WRB300N)
● PBC: Click this software button or directly press the hardware WPS button on both your router
and the new wireless client device (that you want to connect to your router wirelessly) for 1
second to establish an easy and secure wireless connection.
● PIN: To use this option you must know the PIN code from the wireless client. Simply click the
PIN radio button and enter client's PIN code while using the same PIN code on client side for
secure connection.
● Reset OOB: When clicked, the WPS LED will display a solid light; the WPS function will be
disabled automatically; WPS server on the Router enters idle mode and will not respond to client's
WPS connection request.
Note:
1. If you find the WPS LED blinking for 2 minutes after you select and apply the PBC mode, it
means that the PBC encryption method is successfully enabled.
Repeat steps mentioned above if you want to connect more wireless client devices to your router.
2. The WPS function can be implemented only between your Router and another WPS-enabled
device.

5.2.2 WPA-PSK

The WPA protocol implements the majority of the IEEE 802.11i standard. It enhances data
encryption through the Temporal Key Integrity Protocol (TKIP) which is a 128-bit per-packet key,
meaning that it dynamically generates a new key for each packet. WPA also includes a message
integrity check feature to prevent data packets from being hampered with. Only authorized
network users can access the wireless network.
● Security Mode: Select a proper mode, which is also supported by your wireless clients, from
the drop-down menu.
● WPA Algorithms: Select either AES (advanced encryption standard) or TKIP (temporary key
integrity protocol) type.
● Key: Enter a security key，which must be between 8-63 ASCII characters.
22