Wpa-Psk - iBall iB-WRH150N User Manual

enters idle mode and will not respond to client's WPS connection request.
Note:
1. If you find the WPS LED blinking for 2 minutes after you select and apply
the PBC mode, it means that the PBC encryption method is successfully enabled.
And an authentication will be performed between your router and the
WPS/PBC-enabled wireless client device during this time; if it succeeds, the
wireless client device connects to your device, and the WPS LED displays a solid
light thereafter. Repeat steps mentioned above if you want to connect more wireless
client devices to your router.
2. The WPS function can be implemented only between your Router and
another WPS-enabled device.

5.2.2 WPA-PSK

The WPA protocol implements the majority of the IEEE 802.11i
standard. It enhances data encryption through the Temporal Key Integrity
Protocol (TKIP) which is a 128-bit per-packet key, meaning that it
dynamically generates a new key for each packet. WPA also includes a
message integrity check feature to prevent data packets from being
hampered with. Only authorized network users can access the wireless
network.
● Security Mode: Select a proper mode, which is also supported by your
wireless clients, from the drop-down menu.
● WPA Algorithms: Select either AES (advanced encryption standard) or
TKIP (temporary key integrity protocol) type.
● Key: Enter a security key ， which must be between 8-63 ASCII
characters.
150M Wireless-N Home Router
38
(iB-WRH150N)