Traffic Statistics - iBall Baton iB-WRB300N User Manual

300M MIMO Wireless-N Router
(iB-WRB300N)

6.2 Traffic Statistics

Statistics dynamically displays bandwidth usage by PCs on your LAN.
● Enable Traffic Statistics: Check the box to gather bandwidth usage by PCs on your LAN. It is
disabled by default. Disabling this option may boost router's packet processing capacity. When
enabled, system will dynamically renew statistics information every 5 seconds.
● IP Address: Displays IP address information of a corresponding statistics item.
● Uplink Rate: Displays how many Kbytes of data have been transmitted per second.
● Downlink Rate: Displays how many Kbytes of data have been received per second.
● Sent Message (TX Packets): Displays the total number of packets transmitted by a
corresponding IP address through the router.
Sent Bytes: Displays how many Mbytes of data have been transmitted by a corresponding IP
address through the router.
Received Message (RX Packets): Displays the total number of packets received by a
corresponding IP address from the router.
● Received Bytes: Displays how many Mbytes of data have been received by a corresponding IP
address from the router.
30