iBall iB-WRX150NE Baton User Manual
  1. Manuals
  2. Brands
  3. iBall Manuals
  4. Wireless Router
  5. iB-WRX150NE Baton
  6. User manual

iBall iB-WRX150NE Baton User Manual

150m extreme wireless-n router
Hide thumbs
Table of Contents

Advertisement

Quick Links

150M eXtreme Wireless-N Router
Model No. iB-WRX150NE
1910020492
Ver: 1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iB-WRX150NE Baton and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for iBall iB-WRX150NE Baton

Summary of Contents for iBall iB-WRX150NE Baton

  • Page 1 150M eXtreme Wireless-N Router Model No. iB-WRX150NE 1910020492 Ver: 1.0.0...

  • Page 2: Fcc Statement

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 3: Ce Mark Warning

    CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. - II -...

  • Page 4: Table Of Contents

    CONTENTS Package Contents.....................1 Chapter 1 Introduction .....................2 Overview of the Router .......................2 Conventions ........................3 Main Features ........................3 Panel Layout ........................4 1.4.1 The Front Panel......................4 1.4.2 The Rear Panel ......................5 Chapter 2 Connecting the Router................6 System Requirements......................6 Installation Environment Requirements ................6 Connecting the Router ......................6 Chapter 3 Quick Installation Guide................8 TCP/IP Configuration ......................8...
  • Page 5 4.7.2 Wireless Security ....................36 4.7.3 Wireless MAC Filtering ..................39 4.7.4 Wireless Advanced ....................42 4.7.5 Wireless Statistics....................43 DHCP ..........................44 4.8.1 DHCP Settings..................... 44 4.8.2 DHCP Clients List ....................45 4.8.3 Address Reservation ................... 45 Forwarding ........................47 4.9.1 Virtual Servers .....................
  • Page 6 4.16.1 Dyndns.org DDNS ....................72 4.16.2 No-ip.com DDNS ....................73 4.17 Maintenance／System Tools ................... 74 4.17.1 Time Settings....................... 74 4.17.2 Diagnostic Tool ....................75 4.17.3 Firmware Upgrade....................76 4.17.4 Factory Defaults....................77 4.17.5 Backup & Restore....................78 4.17.6 Restart ......................... 79 4.17.7 Password ......................

  • Page 7: Package Contents

    iB-WRX150NE 150M Extreme Wireless-N Router Package Contents The following items should be found in your package: 150M Extreme Wireless-N Router (iB-WRX150NE)  DC Power Adapter  Quick Installation Guide  Resource CD for 150M Extreme Wireless-N Router, including:   Easy Setup Wizard ...

  • Page 8: Chapter 1 Introduction

    iB-WRX150NE 150M Extreme Wireless-N Router Chapter 1 Introduction Thank you for choosing iBallBaton 150M Extreme Wireless-N Router. 1.1 Overview of the Router The iB-WRX150NE 150M Extreme Wireless-N Router integrates 4-port Switch, Firewall, NAT-Router and Wireless AP. The 150M Extreme Wireless-N Router delivers exceptional range and speed, which can fully meet the need of Small Office/Home Office (SOHO) networks and the users demanding higher networking performance.

  • Page 9: Conventions

    iB-WRX150NE 150M Extreme Wireless-N Router 1.2 Conventions The Router or iB-WRX150NE mentioned in this guide stands for iBallBaton 150M Extreme Wireless-N Router without any explanation. 1.3 Main Features  Complies with IEEE802.3, IEEE 802.3u standards  Complies with IEEE 802.11b/g/n wireless standards ...

  • Page 10: Panel Layout

    iB-WRX150NE 150M Extreme Wireless-N Router 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 Front Panel sketch  WPS/Reset： There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on “System Tools → Factory Defaults” page in the Router's Web-based Utility.

  • Page 11: The Rear Panel

    iB-WRX150NE 150M Extreme Wireless-N Router keep on for about 2 minutes and then turn off. 2. When press and hold the WPS/Reset Button for more than 5 seconds, you will reset the router. 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right).

  • Page 12: Chapter 2 Connecting The Router

    iB-WRX150NE 150M Extreme Wireless-N Router Chapter 2 Connecting the Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet)  1 DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is  connected directly to the Ethernet.) Computer with a working Ethernet Adapter and an Ethernet cable with RJ45 connector ...
  • Page 13 iB-WRX150NE 150M Extreme Wireless-N Router Connect the power adapter to the power socket on the Router, and the other end into an electrical outlet. The Router will start to work automatically. Power on your PC and Cable/DSL Modem. Figure 2-1 Hardware Installation of the iB-WRX150NE - 7 -...

  • Page 14: Chapter 3 Quick Installation Guide

    iB-WRX150NE 150M Extreme Wireless-N Router Chapter 3 Quick Installation Guide This chapter will show you how to configure the basic functions of your iB-WRX150NE 150M Extreme Wireless-N Router using Quick Configuration Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the iB-WRX150NE 150M Extreme Wireless-N Router is 192.168.1.1 and the default Subnet Mask is 255.255.255.0.
  • Page 15 iB-WRX150NE 150M Extreme Wireless-N Router Figure 3-1 Success result of Ping command  If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router is failed. Figure 3-2 Failure result of Ping command Please check the connection following these steps: Is the connection between your PC and the Router correct? ...

  • Page 16: Quick Installation Guide

    iB-WRX150NE 150M Extreme Wireless-N Router 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the iB-WRX150NE150Mbps Wireless -N Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
  • Page 17 iB-WRX150NE 150M Extreme Wireless-N Router Figure 3-5 Quick Configuration Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6. Figure 3-6 WAN Connection Type The Router supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the Internet.
  • Page 18 iB-WRX150NE 150M Extreme Wireless-N Router User Name/Password - Enter the User Name and Password provided by your ISP.  These fields are case sensitive. If you have difficulty with this process, please contact your ISP. ２） If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure 3-9.
  • Page 19 Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be iBall Baton Region - Select your region from the pull-down list. This field specifies the region where ...
  • Page 20 iB-WRX150NE 150M Extreme Wireless-N Router For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters. For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, the length should be between 8 and 64 characters.

  • Page 21: Chapter 4 Configuring The Router

    iB-WRX150NE 150M Extreme Wireless-N Router Chapter 4 Configuring the Router This chapter will show each Web page's key functions and the configuration way. 4.1 Login After your successful login, you will see the fifteen main menus on the left of the Web-based utility. On the right, there are the corresponding explanations and instructions.

  • Page 22: Quick Configuration

    iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-2 Router Status 4.3 Quick Configuration Please refer to Section 3.2: "Quick Installation Guide." 4.4 WPS This section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi Protect Setup) function.
  • Page 23 To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. For the configuration of the new device, we have taken iBall Baton 150M Extreme Wireless-N USB Adapter product for example.
  • Page 24 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-3 Step2: Double click the icon on the desktop to open the WPS Utility and then you can see the welcome screen shown, Click Next to continue Select Push the button on my access point in the configuration utility of the WPS as shown below in Figure 4-4, and click Next.
  • Page 25 Note: Please run the WPS Utility within two minutes after pressing the WPS Button on the router, otherwise connection will not be established successfully. 2. PBC Method-II Step 1: Login the iBall Baton Web-based Menu of the Router and click WPS link on the left of the main menu. Below displayed figure will appear. Figure 4-6 Step 2: Click Add device, Select Press the button of the new device in two minutes and click Connect as shown below in the figure.
  • Page 26 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-7 Step 3: Press the WPS button of the Wireless adapter as shown below in the Figure 4-8. WPS Button Figure 4-8 Wait for a while until the next screen appears as shown below in Figure 4-9. Click Finish to complete the WPS Configuration.

  • Page 27: Enter A Pin Into Your Ap Device (Method-I)

    WPS configuration. Click Next button. Figure 4-10 Step 2: Login the iBall Baton Router Menu and click WPS link on the left of the main menu. Click Add device, then you can see Figure 4-11 . Click Add device button.
  • Page 28 iB-WRX150NE 150M Extreme Wireless-N Router Step 3: Select Enter the new device’s PIN option and enter the PIN value of the wireless adapter as shown in Figure 4-12. Figure 4-12 Step 4: Message Connect successfully will appear in the WPS Menu Interface, as shown in Figure 4-13.

  • Page 29: Enter A Pin Into Your Ap Device (Method-Ii)

    4.4.2 Enter a PIN into your AP device (Method-II) Step 1: Login the iBall Baton Router Menu and click WPS link on the left of the main menu. Then Figure 4-15 will appear. Write down the Current PIN code available.

  • Page 30: Operation Mode

    iB-WRX150NE 150M Extreme Wireless-N Router  Note: If you generate a new PIN code for your Router, please enter the new one instead. The WPS LED on the Router will light green for two minutes if the device has been successfully added to the network.

  • Page 31: Lan

    iB-WRX150NE 150M Extreme Wireless-N Router 4.6.1 Choose menu “Network Settings → LAN”, you can configure the IP parameters of the LAN on the screen as below. Figure 4-21 LAN MAC Address - The physical address of the Router, as seen from the LAN. The value can't ...
  • Page 32 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-22 (WAN-Dynamic IP) This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the Release button to release the IP parameters. ...
  • Page 33 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-23 (WAN - Static IP) IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.  Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, ...
  • Page 34 iB-WRX150NE 150M Extreme Wireless-N Router If your ISP provides a PPPoE connection, select PPPoE option. And you should enter the following parameters (Figure 4-24): Figure 4-24 (WAN-PPPoE) User Name/Password - Enter the User Name and Password provided by your ISP. These ...
  • Page 35 iB-WRX150NE 150M Extreme Wireless-N Router Connect Automatically - The connection can be re-established automatically when it was  down. Time-based Connecting - The connection will only be established in the period from the  start time to the end time (both are in HH:MM format). ...
  • Page 36 iB-WRX150NE 150M Extreme Wireless-N Router ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the  Router during login, please click “Use IP address specified by ISP” check box and enter the IP address provided by your ISP in dotted-decimal notation. Detect Online Interval - The Router will detect Access Concentrator online at every interval.
  • Page 37 iB-WRX150NE 150M Extreme Wireless-N Router Connect button to connect immediately. Click the Disconnect button to disconnect immediately. Connect on Demand - You can configure the Router to disconnect from your Internet  connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again.
  • Page 38 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-27 (PPTP Settings) User Name/Password - Enter the User Name and Password provided by your ISP. These  fields are case-sensitive. Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP ...

  • Page 39: Mac Cloning

    iB-WRX150NE 150M Extreme Wireless-N Router Connect Automatically - Connect automatically after the Router is disconnected. To use this  option, check the radio button. Connect Manually - You can configure the Router to make it connect or disconnect manually.  After a specified period of inactivity (Max Idle Time), the Router will disconnect from your Internet connection, and you will not be able to re-establish connection to use this option, click the radio button.

  • Page 40: Wireless

    iB-WRX150NE 150M Extreme Wireless-N Router WAN MAC Address - This field displays the current MAC address of the WAN port. If your  ISP requires you to register the MAC address, please enter the correct MAC address into this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit). Your PC's MAC Address - This field displays the MAC address of the PC that is managing ...
  • Page 41 Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be iBall Baton Region - Select your region from the pull-down list. This field specifies the region where the ...

  • Page 42: Wireless Security

    iB-WRX150NE 150M Extreme Wireless-N Router Channel - This field determines which operating frequency will be used. The default channel  is set to 6. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. Mode - Select the desired mode.
  • Page 43 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-31 Wireless Security  Disable Security - If you do not want to use wireless security, check this radio button. But it’s strongly recommended to choose one of the following modes to enable security. ...
  • Page 44 iB-WRX150NE 150M Extreme Wireless-N Router  WEP Key Format - Hexadecimal and ASCII formats are provided here Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. ASCII format stands for any combination of keyboard characters in the specified length.

  • Page 45: Wireless Mac Filtering

    iB-WRX150NE 150M Extreme Wireless-N Router  Radius Password - Enter the password for the Radius server.  Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. ...
  • Page 46 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-35 (Wireless MAC Filtering) To filter wireless users by MAC Address, click Enable. The default setting is Disable. MAC Address - The wireless station's MAC address that you want to filter.  Status - The status of this entry either Enabled or Disabled. ...
  • Page 47 iB-WRX150NE 150M Extreme Wireless-N Router Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. Modify the information. Click the Save button. Click the Enable All button to make all entries enabled Click the Disable All button to make all entries disabled.

  • Page 48: Wireless Advanced

    iB-WRX150NE 150M Extreme Wireless-N Router 4.7.4 Wireless Advanced Choose menu “Wireless → Wireless Advanced”, you can configure the advanced settings of your wireless network. Figure 4-37 Wireless Advanced Transmit Power - Here you can specify the transmit power of Router. You can select High, ...

  • Page 49: Wireless Statistics

    iB-WRX150NE 150M Extreme Wireless-N Router Enable Short GI - This function is recommended for it will increase the data capacity by  reducing the guard interval time Enabled AP Isolation - This function can isolate wireless stations on your network from ...

  • Page 50: Dhcp

    iB-WRX150NE 150M Extreme Wireless-N Router 4.8 DHCP Figure 4-39 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 4-39), DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function.

  • Page 51: Dhcp Clients List

    iB-WRX150NE 150M Extreme Wireless-N Router amount of time in minutes and the user will be "leased" this dynamic IP Address. After the time is up, the user will be automatically assigned a new dynamic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. Default Gateway - (Optional.) It is suggested to input the IP address of the LAN port of the ...
  • Page 52 iB-WRX150NE 150M Extreme Wireless-N Router DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP settings. Figure 4-42 Address Reservation MAC Address - The MAC address of the PC for which you want to reserve an IP address. ...

  • Page 53: Forwarding

    iB-WRX150NE 150M Extreme Wireless-N Router 4.9 Forwarding Figure 4-44 The Forwarding menu There are four submenus under the Forwarding menu (shown in Figure 4-44): Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function.

  • Page 54: Port Triggering

    iB-WRX150NE 150M Extreme Wireless-N Router number or service port range in the Service Port box. Type the IP Address of the computer in the IP Address box. Select the protocol used for this application, either TCP, UDP, or All. Select the Enabled to enable the virtual server. Click the Save button.
  • Page 55 iB-WRX150NE 150M Extreme Wireless-N Router pure NAT Router. Port Triggering is used for some of these applications that can work with an NAT Router. Figure 4-47 Port Triggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection using a destination port number defined in the Trigger Port field.

  • Page 56: Dmz

    iB-WRX150NE 150M Extreme Wireless-N Router Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP, or All. Select Enabled in Status field. Click the Save button to save the new rule. Figure 4-48 Add or Modify a Port Triggering Entry To modify or delete an existing entry: Click the Modify in the entry you want to modify.

  • Page 57: Upnp

    iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-49 DMZ To assign a computer or server to be a DMZ server: Check the Enable radio button Enter the IP Address of a local host in the DMZ Host IP Address field Click the Save button. ...

  • Page 58: Security

    iB-WRX150NE 150M Extreme Wireless-N Router Status - The status of the port is displayed here. “Enabled” means that the port is still  active. Otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 4.10 Security Figure 4-51 The Security menu There are four submenus under the Security menu as shown in Figure 4-51: Basic Security, Advanced Security, Local Management and Remote Management.

  • Page 59: Advanced Security

    iB-WRX150NE 150M Extreme Wireless-N Router ensuring private, secure communications over Internet Protocol (IP) networks, through the use of cryptographic security services. To allow IPSec tunnels to pass through the Router, keep the default, Enabled. ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows ...

  • Page 60: Local Management

    iB-WRX150NE 150M Extreme Wireless-N Router section of the packets statistics. The result of the statistics is used for analysis by SYN Flood, UDP Flood and ICMP-Flood.  DoS protection - Denial of Service protection. Check the Enable or Disable button to enable or disable the DoS protection function.

  • Page 61: Remote Management

    iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-54 Local Management By default, the radio button “All the PCs on the LAN are allowed to access the Router's Web-Based Utility” is checked. If you want to allow PCs with specific MAC Addresses to access the Setup page of the Router's Web-Based Utility locally from inside the network, check the radio button “Only the PCs listed can browse the built-in web pages to perform Administrator tasks”, and then enter each MAC Address in a separate field.

  • Page 62: Parental Control

    iB-WRX150NE 150M Extreme Wireless-N Router Remote Management IP Address - This is the current address you will use when accessing  your Router from the Internet. This function is disabled when the IP address is set to the default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address. If set to 255.255.255.255, then all the hosts can access the Router from internet.
  • Page 63 iB-WRX150NE 150M Extreme Wireless-N Router Schedule - The time period allowed for the PC controlled to access the Internet. For detailed  information, please go to “Access Restriction→ Schedule”. Modify - Here you can edit or delete an existing entry. ...
  • Page 64 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-57 Add or Modify Parental Control Entry For example: If you desire that the child PC with MAC address 00-11-22-33-44-AA can access www.google.com on Saturday only while the parent PC with MAC address 00-11-22-33-44-BB is without any restriction, you should follow the settings below.

  • Page 65: Access Restriction

    iB-WRX150NE 150M Extreme Wireless-N Router Then you will go back to the Parental Control Settings page and see the following list, as shown in Figure 4-58. Figure 4-58 Parental Control Settings 4.12 Access Restriction Figure 4-59 Access Restriction There are four submenus under the Access Restriction menu as shown in Figure 4-59: Rule, Host, Target and Schedule.
  • Page 66 iB-WRX150NE 150M Extreme Wireless-N Router Enable Internet Access Restriction - Select the check box to enable the Internet Access Restriction function, so the Default Filter Policy can take effect. Rule Name - Here displays the name of the rule and this name is unique. ...
  • Page 67 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-61 Add or Modify Internet Access Restriction Entry For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the LAN to access the Internet, you should follow the settings below: 1.

  • Page 68: Host

    iB-WRX150NE 150M Extreme Wireless-N Router 4.12.2 Host Choose menu “Access Restriction → Host”, you can view and set a Host list in the screen as shown in Figure 4-62. The host list is necessary for the Access Restriction Rule. Figure 4-62 Host Settings Host Description - Here displays the description of the host and this description is unique.

  • Page 69: Target

    iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-63 Add or Modify a Host Entry Figure 4-64 Add or Modify a Host Entry For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA, you should first follow the settings below: Click Add New...
  • Page 70 iB-WRX150NE 150M Extreme Wireless-N Router Target Description - Here displays the description about the target and this description is  unique. Information - The target can be an IP address, a port, or a domain name.  Modify - To modify or delete an existing entry. ...

  • Page 71: Schedule

    iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-67 Add or Modify an Access Target Entry For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA in the LAN to access www.google.com only, you should first follow the settings below: 1.
  • Page 72 iB-WRX150NE 150M Extreme Wireless-N Router Schedule Description - Here displays the description of the schedule and this description is  unique. Day - Here displays the day(s) in a week.  Time - Here displays the time period in a day. ...

  • Page 73: Static Routing

    iB-WRX150NE 150M Extreme Wireless-N Router 2. In Schedule Description field, create a unique description for the schedule (e.g. Schedule_1). 3. In Day field, check the Select Days radio button and then select Sat and Sun. 4. In Time field, enter 1800 in Start Time field and 2000 in Stop Time field. 5.

  • Page 74: Bandwidth Control

    iB-WRX150NE 150M Extreme Wireless-N Router Subnet Mask - The Subnet Mask determines which portion of an IP Address is the  network portion, and which portion is the host portion.  Gateway - This is the IP Address of the gateway device that allows for contact between the Router and the network or host.

  • Page 75: Ip& Mac Bing Setting

    iB-WRX150NE 150M Extreme Wireless-N Router IP Range - IP range of this entry.  Mode - There are two types of mode: Minimum Bandwidth Guarantee and Maximum  Bandwidth Limit. Bandwidth - The bandwidth you supply to this entry.  Description - The description for this entry.
  • Page 76 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-74 Binding Settings MAC Address - The MAC address of the controlled computer in the LAN.  IP Address - The assigned IP address of the controlled computer in the LAN.  Bind - Check this option to enable ARP binding for a specific device. ...

  • Page 77: Arp List

    iB-WRX150NE 150M Extreme Wireless-N Router Click the Find button in the page as shown in Figure 4-76. Figure 4-76 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.15.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could configure the items on...

  • Page 78: Dynamic Dns

    iB-WRX150NE 150M Extreme Wireless-N Router  Note: An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without interference to the IP &...

  • Page 79: No-Ip.com Ddns

    iB-WRX150NE 150M Extreme Wireless-N Router Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service. 4.16.2 No-ip.com DDNS If you select www.no-ip.com, the page will appear as shown in Figure 4-79. Figure 4-79 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: Type the User Name for your DDNS account.

  • Page 80: Maintenance／System Tools

    iB-WRX150NE 150M Extreme Wireless-N Router 4.17 Maintenance／System Tools Figure 4-80 The System Tools menu Choose menu “Maintenance／System Tools”, you can see the submenus under the main menu: Time Settings, Diagnostic Tool, Firmware Upgrade, Factory Defaults, Backup & Restore, Restart, Password, System Log and Statistics. Click any of them, and you will be able to configure the corresponding function.

  • Page 81: Diagnostic Tool

    iB-WRX150NE 150M Extreme Wireless-N Router To configure the system manually: Select your local time zone. Enter date and time in the right blanks. Click Save to save the configuration. To configure the system automatically: Select your local time zone. Enter the IP address for NTP Server Prior. Click the Get GMT button to get system time from Internet if you have connected to the Internet.

  • Page 82: Firmware Upgrade

    iB-WRX150NE 150M Extreme Wireless-N Router  Diagnostic Tool - Check the radio button to select one diagnostic tool. Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution  to a given host or gateway. Traceroute - This diagnostic tool tests the performance of a connection. ...

  • Page 83: Factory Defaults

    Router’s current hardware version. To upgrade the Router's firmware, follow these instructions below: 1. Download a more recent firmware upgrade file from the iBall Baton website (www.iballbaton.com). 2. Type the path and file name of the update file into the File field. Or click the Browse button to locate the update file.

  • Page 84: Backup & Restore

    iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-85 Restore Factory Default Click the Restore button to reset all configuration settings to their default values.  The default User Name: admin  The default Password: admin  The default IP Address: 192.168.1.1 ...

  • Page 85: Restart

    iB-WRX150NE 150M Extreme Wireless-N Router 4.17.6 Restart Choose menu “System Tools → Restart”, you can click the Restart button to restart the Router via the next screen. Figure 4-87 Restart the Router Some settings of the Router will take effect only after restarting, which include: ...

  • Page 86: System Log

    iB-WRX150NE 150M Extreme Wireless-N Router  Note: The new user name and password must not exceed 14 characters in length and not include any spaces. Enter the new Password twice to confirm. Click the Save button when finished. Click the Clear All button to clear all. 4.17.8 System log Choose menu “System Tools →...

  • Page 87: Statistics

    iB-WRX150NE 150M Extreme Wireless-N Router To - Recipient’s address. The destination mailbox where the logs would be received.  SMTP Server - Your SMTP server. It corresponds with the mailbox filled in the From  field. You can log on the relevant website for Help if you are not clear with the address.
  • Page 88 iB-WRX150NE 150M Extreme Wireless-N Router Figure 4-91 Statistics Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click  the Enable button. Packets Statistics Interval （5-60） - The default value is 10. Select a value between 5 and ...
  • Page 89 iB-WRX150NE 150M Extreme Wireless-N Router The total amount of the UDP packets transmitted to WAN in the last UDP Tx Packets Statistic interval seconds. The total amount of the TCP SYN packets transmitted to WAN in SYN Tx the last Packets Statistic interval seconds. There would be 5 entries on each page.

  • Page 90: Appendix A: Faq

    iB-WRX150NE 150M Extreme Wireless-N Router Appendix A: FAQ How do I configure the Router to access the Internet by ADSL users? First, configure the ADSL Modem configured in RFC1483 bridge model. The telephone connection should be plug into the Line port of the ADSL Modem. Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router.
  • Page 91 iB-WRX150NE 150M Extreme Wireless-N Router How do I configure the Router to access the Internet by Ethernet users? Open the Router Web Based Menu and Login the Router, select the “Network Settings” menu on the left of your browser, and click "WAN" submenu. On the WAN page, select “Dynamic IP”...
  • Page 92 iB-WRX150NE 150M Extreme Wireless-N Router Figure A-5 Add or Modify a Virtual server Entry  Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. How to enable DMZ Host: Log in to the Router, click the “Forwarding” menu on the left of your browser, and click "DMZ"...
  • Page 93 iB-WRX150NE 150M Extreme Wireless-N Router Figure A-7 Basic security I want to build a WEB Server on the LAN, what should I do? Because the WEB Server port 80 will interfere with the WEB management port 80 on the Router, you must change the WEB management port number to avoid interference. To change the WEB management port number: Log in to the Router, click the “Security”...
  • Page 94 iB-WRX150NE 150M Extreme Wireless-N Router “Service Port”, and your IP address next to the “IP Address”, assuming 192.168.1.188 for an example, remember to Enable and Save. Figure A-9 Virtual Servers Figure A-10 Add or Modify a Virtual server Entry The wireless stations cannot connect to the Router. Make sure the "Enable Wireless Router Radio"...

  • Page 95: Appendix B: Configuring The Pc

    iB-WRX150NE 150M Extreme Wireless-N Router Appendix B: Configuring the PC In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary. Configure TCP/IP component On the Windows taskbar, click the Start button, and then click Control Panel.
  • Page 96 iB-WRX150NE 150M Extreme Wireless-N Router Figure B-2 The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below:  Setting IP address automatically Select Obtain an IP address automatically, Choose Obtain DNS server automatically, as shown in the Figure below: - 90 -...
  • Page 97 iB-WRX150NE 150M Extreme Wireless-N Router Figure B-3  Note: For Windows 98 OS or before, the PC and Router may need to be restarted.  Setting IP address manually Select Use the following IP address radio button. And the following items available If the Router's LAN IP address is 192.168.1.1, specify the IP address as 192.168.1.x (x is from 2 to 254), and the Subnet mask as 255.255.255.0.
  • Page 98 iB-WRX150NE 150M Extreme Wireless-N Router Now: Click OK to keep your settings. - 92 -...

  • Page 99: Appendix C: Specifications

    iB-WRX150NE 150M Extreme Wireless-N Router Appendix C: Specifications General Standards IEEE 802.3, 802.3u, 802.11b, 802.11g & 802.11n Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SMTP One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M Ports Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω...

  • Page 100: Appendix D: Glossary

    iB-WRX150NE 150M Extreme Wireless-N Router Appendix D: Glossary 802.11b - The 802.11b standard specifies a wireless networking at 11 Mbps using  direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks.
  • Page 101 iB-WRX150NE 150M Extreme Wireless-N Router WEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64-bit or 128-bit or  152-bit shared key algorithm, as described in the IEEE 802.11 standard. Wi-Fi - A trade name for the 802.11b wireless networking standard, given by the Wireless ...
  • Page 102 150M Extreme Wireless-N Router COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. iBall Baton is a registered trademark of Best IT World (India) Pvt. Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

Table of Contents

Save PDF