iBall Baton iB-WRB300N User Manual page 28

300M MIMO Wireless-N Router
(iB-WRB300N)
● MAC Address Filter: "Permit" means to permit PCs at specified MAC addresses to connect to
your wireless network while "Forbid" means to block PCs at specified MAC addresses from
connecting to your wireless network.
● MAC Address: Enter the MAC addresses of a wireless client and click "Add".
● MAC Address List: Displays the MAC addresses added by you. You can delete any entry by
clicking on the "Delete" button nearby.
Example 1:
To allow only a PC at the MAC address of 00:1e:a6:a4:56:75 to connect to your wireless network,
do as follows:
Step1. Select "Permit" from MAC Address Filter drop-down menu.
Step2. Enter 00:1e:a6:a4:56:75 in the MAC address box.
Step3. Click the "OK" button to save your settings and you can add more MAC addresses, if you
like, simply repeating the follow steps.
Example 2:
To prohibit only a PC at the MAC address of 00:1e:a6:67:d4:23 from connecting to your wireless
network, follow steps above and make a few necessary changes as shown follow.
24