Table of Contents
Advertisement
300M MIMO Wireless-N Router
(iB-WRB300N)
Chapter 9 Maintenance
9.1 Restart
By Rebooting the device，new settings can be brought into effect. And WAN connection will be
cut automatically during this process.
9.2 Factory Default
To restore all settings to the device's factory default values, click the "Restore to Factory Default"
button on the interface below:
Note: To activate your settings, reboot the device after you reset it.
9.3 Backup/Restore
This section allows you to backup current settings or to restore the previous settings configured on
the device.
● Backup : Once you have configured the device the way you want it, you can save these settings
to a configuration file on your local hard drive that can later be imported to your device in case
that the device is restored to factory default settings. To do this, click the "Backup" button next to
where it says "Select the file directory to save the configured parameters" on the screen above.
41
Hide quick links:
Advertisement
Table of Contents
