300M MIMO Wireless-N Router
(iB-WRB300N)
Chapter 2 Installation
1. Connect one end of the included power adapter to the router and then plug the other end into a
wall outlet nearby.
2. Connect the LAN port on the Router to the NIC port on your PC using an Ethernet cable.
3. Connect the WAN port on the Router to an Internet-enabled Cable/xDSL modem using an
Ethernet cable.
4. Insert the included "Easy Setup Wizard" CD-ROM into your PC's drive, click "Setup.exe" if
the program does not run automatically and follow onscreen instructions to complete settings. Or
directly launch a web browser and configure the router on web based utility (For details, refer to
chapter 3).
3