Dhcp; Dhcp Clients & Address Reservation - iBall Baton iB-WRB300N User Manual

● Primary DNS Address: Enter the DNS server address provided by your
ISP.
● Secondary DNS Address: Enter the secondary DNS address if your
ISP offers you 2 DNS addresses (Optional).
Note:
1. Wrong DNS server addresses will lead to failure in accessing websites.
2. To activate the new settings, reboot the device.

4.7 DHCP

The Dynamic Host Configuration Protocol (DHCP) is an automatic configuration protocol used on
IP networks. If you enable the built-in DHCP server on the device, it will automatically configure
the parameters of TCP/IP protocol for all your LAN computers (including IP address, subnet mask,
gateway and DNS etc), eliminating the need for manual intervention. Be sure to set your
computers to be DHCP clients by setting their TCP/IP settings to "Obtain an IP Address
Automatically". When you turn your computers on, they will automatically load the proper
TCP/IP settings provided by the device.
● DHCP Server: Check or uncheck the box to enable or disable the device's DHCP server feature.
● IP pool start address: Enter the starting IP address for the DHCP server's IP assignment.
● IP pool end address: Enter the ending IP address for the DHCP server's IP assignment.
● Lease Time: The length of time for the IP address lease. Configuring a proper lease time
improves the efficiency for the DHCP server to reclaim disused IP addresses.
4.8 DHCP Clients & Address Reservation
This section not only displays a DHCP dynamic client list but also includes a configurable Static
DHCP assignment feature.
300M MIMO Wireless-N Router
18
(iB-WRB300N)