Upnp; Routing Table - iBall Baton iB-WRB300N User Manual

Username
Password
Domain Name
For example: If you have registered a DDNS service in no-ip.com and are allocated with domain,
12345678, domain.no-ip.com respectively as username, password and domain name for a web
server on your PC at 192.168.1.10, then configure port settings on port range forwarding interface
under virtual server menu and enter this information on the above DDNS interface. Others can
access your web server by simply entering http://domain. no-ip.com in their browser address bar.

7.4 UPnP

UPnP (Universal Plug and Play) allows a network device to discover and connect to other devices
on the network. With this feature enabled, hosts in LAN can request the device to perform special
port forwarding so as to enable external hosts to access resources on internal hosts.
● Enable UPnP: Check/uncheck to enable/disable the UPnP feature.

7.5 Routing Table

This page displays the router's core routing table which lists destination IP address, subnet mask,
gateway, hop count and interface.
The principal task for a router is to look for an optimal transfer path for each data packet passing
through it, and transfer it to the specified destination. So, it's essential for the router to select an
optimal path, i.e. routing algorithm. To complete this work, the router stores related data of various
transfer paths, i.e. establishing a routing table, for future route selection.
300M MIMO Wireless-N Router
Admin
12345678
domain.no-ip.com
34
(iB-WRB300N)