300M Wireless-N ADSL2+ 3G & Broadband Router
The following table describes the parameters and buttons of this page:
Field
DHCP Mode
Relay Server
Apply Changes
DHCP Static
Choose Network Setup > LAN > DHCP Static IP, the page shown in the following figure
appears. You can assign the IP addresses on the LAN to the specific individual PCs
based on their MAC address.
If set to DHCP Relay, the router acts a surrogate
DHCP Server and relays the DHCP requests and
responses between the remote server and the client.
Enter the DHCP server address provided by your ISP.
Click it to save the settings of this page.
35
Description
iB-WRA300N3GT