Rear Panel - Datavideo HDR-70 Instruction Manual

HD / SD Recorder HDR-70

Rear panel

XLR inputs and Outputs for Balanced Audio Connection.
Note: The recorder needs a video source in order to record files.
See page 19 also.
The GPI socket can be used for simple external control. The
recorder can accept pulse or level trigger inputs, which can trigger
record or playback and pause commands. See page 20 also.
RS-232/422 user selectable remote control (selection in menu).
See page 24 onwards.
Black Burst input/ output.
Can be used as a video reference source when synchronizing other
devices to the recorder.
Time Code input/ output.
The user can select the time code source as internal or external. Set
time code source to external when supplying an external Time Code
source to this input port.
HDMI Out Port.
Port for connecting to HDMI external devices.
HD- SDI input, output and loop-through connectors.
4:2:2 SDI Video data supports SMPTE 292M standard at 1.5Gbps.
SDI transfers professional level video signals and can connect to
long distance transmission systems.
DC In Socket. Connect the supplied 12V PSU to this socket. The
connection can be secured by screwing the outer fastening ring of
the DC In plug to this socket.
Power On/Off Switch.
Depress the dot side of the switch to turn the unit on. See front panel
soft power on / off button also.
Grounding Terminal.
When connecting this unit to any other component, make sure that it
is properly grounded by connecting this terminal to an appropriate
point. When connecting, use the socket and be sure to use wire with
a cross-sectional area of at least 1.0mm2.
9