System Set Up; Set Audio Monitor; Lcd Audio Peak Meter - Datavideo HDR-70 Instruction Manual

Analogue / Digital Recorder

System Set Up

SYSTEM SETUP
The menu has the following options
MAIN MENU SUB MENU 1
TOOL
SETUP
STATUS RECORD SETUP
PLAY SETUP
SYSTEM SETUP
SAVE SETUP
RECALL SETUP

Set Audio Monitor

This LCD menu option allows the user to choose
which audio channel pair to monitor with the front
panel LED audio peak meter and the headphone
socket.
Use the LCD menu path [MENU] > SETUP >
SYSTEM SETUP > SET AUDIO MONITOR
The default setting is AUDIO CHANNEL 1 & 2.
There are four stereo pair monitoring options:
AUDIO CHANNEL 1 & 2, or
AUDIO CHANNEL 3 & 4, or
AUDIO CHANNEL 5 & 6, or
AUDIO CHANNEL 7 & 8
The current selection will be marked with an
asterisk [*].
The default setting is AUDIO CHANNEL 1 & 2.
SUB MENU 2
SET AUDIO MONITOR
SELECT AUDIO SOURCE
SET TIME CODE
SET GPI
SET REMOTE INTERFACE
SET BUZZER
SET LONG TIME STOP
DATE & TIME SET UP

LCD Audio Peak meter

Whilst recording or playing back a CLIP, the front
panel RECORD button can be pressed. This
changes the LCD panel from the Clip Status view
to an LCD Audio Peak Meter view.
Pressing the record button will cycle the LCD
panel view through Audio Channels 1 to 4, Audio
Channels 5 to 8 and then back to Clip Status view
again.
If there are no audio channels present the bars will
not move on the LCD display. If audio is present
then the level bars will move for that channel and a
dBFS value will be shown alongside.
18
DN-700
See below section.
See page 19.
See page 14.
See page 20.
See page 24.
See page 24.
See page 24.
See page 24.