Trouble Shooting And Indication Of Malfunction; Trouble Shooting; Indication Of Malfunction - AAT max-e User Manual

7 Trouble shooting - indication of malfunction
7.1 Trouble shooting
If you have problems operating your max-e, see whether you can remove
them with the help of the following
Problem
max-e cannot be turned on
Batteries don't charge
Power shafts do not emerge on one or
both sides
Pressure is not reached
7.2

Indication of malfunction

The display indicates malfunction as
7.2.1 Possible indication of malfunction
F
All indicated malfunctions can be confirmed by the + key
Malfunction of the control unit
Low voltage
Parameter
Software
Unidentified
instructions.
Check and potential problem solving
Is the charger connected to the max-e?
If so, disconnect the charging cable and plug in the power cable
Is the battery pack or the control unit empty?
If so, charge the batteries and the control unit.
Are the fuses damaged?
If so, exchange the fuses.
Ist das Problem immer noch vorhanden?
Wenn ja: Fachhändler verständigen.
Please contact your dealer
Loosen set screw of the horizontal adjustment (located directly on the
housing) and screw it tight again (check the mounting width).
Loosen set screw of the horizontal adjustment (located directly on the
housing) and screw it tight again (check the mounting width).
If there is still a problem, please contact you dealer.
follows.
Explanation
Batteries of the control unit are under voltage
Parameter in EEPROM false
Error when running the control unit's software
Invalid error code (error of software)
27
Error!
Drive
Pressure not reached
Acknowledge with +
.
max-e