Inserting The Digital Scanner In The Cradle; Inserting Digital Scanner In The Cr0078-S/Cr0008-S Cradle - Motorola DS6878 Product Reference Manual

1 - 12 DS6878 Product Reference Guide

Inserting the Digital Scanner in the Cradle

Insert the digital scanner in the cradle so that the metal contacts on the bottom of the digital scanner handle touch
the contacts on the cradle. Push the handle lightly to ensure a proper connection, engaging the contacts in the
cradle and digital scanner. Ensure the desk/wall mount converter knob on the back of the cradle is in the correct
position for the horizontal or vertical mounting.
NOTE References to mounting the cradle only apply to the CR0078-S/CR0008-S cradle (not the CR0078-P
cradle).

Inserting Digital Scanner in the CR0078-S/CR0008-S Cradle

Horizontal Cradle Mount
When mounting the cradle horizontally, where no fastening is necessary:
Ensure the rubber feet are attached to the cradle. These feet provide traction and prevent surface damage.
1.
Ensure the desk/wall mount converter knob is in the position shown in
2.
Desk/Wall Mount
Converter Knob
Horizontal Mount - Inserting the Digital Scanner in the Cradle
Figure 1-10
Vertical Cradle Mount
When mounting the cradle vertically:
Ensure the rubber feet are attached to the cradle. These feet provide traction and prevent surface damage.
1.
Ensure the convertible mount hook on the front of the cradle is inserted with the hook facing up. If not, remove
2.
and reverse the hook so that it is in position to secure the digital scanner in place. (See
for the location of the convertible mount hook.)
Figure 1-10.
Figure 1-3 on page 1-4