Battery Reconditioning Led Definitions; Inserting The Digital Scanner In The Cradle; Horizontal Cradle Mount - Motorola Symbol DS6878 Product Reference Manual

Hide thumbs Also See for Symbol DS6878:
Table of Contents

Advertisement

The digital scanner must perform two charge cycles to complete the battery reconditioning process
3.
(discharge/charge/discharge/charge). See

Battery Reconditioning LED Definitions

Battery Reconditioning LED Definitions
Table 1-1
Battery Reconditioning
Mode
Discharging
Charging
Reconditioning Complete

Inserting the Digital Scanner in the Cradle

Insert the digital scanner in the cradle so that the metal contacts on the bottom of the digital scanner handle touch
the contacts on the cradle. Push the handle lightly to ensure a proper connection, engaging the contacts in the
cradle and digital scanner. Ensure the desk/wall mount converter knob on the back of the cradle is in the correct
position for the horizontal or vertical mounting.

Horizontal Cradle Mount

When mounting the cradle horizontally, where no fastening is necessary:
Ensure the rubber feet are attached to the cradle. These feet provide traction and prevent surface damage.
1.
Ensure the desk/wall mount converter knob is in the position shown in
2.
Desk/Wall Mount
Converter Knob
Horizontal Mount - Inserting the Digital Scanner in the Cradle
Figure 1-7
Table
1-1.
LED
Red Flash
Green Flash
Green - Solid (always on)
Comments
Time to discharge is approximately 2.5 hours.
Time to charge is approximately 2.5 hours with an
external power supply.
The digital scanner enters a trickle charge until the
digital scanner is removed from the cradle.
Figure
1-7.
Getting Started 1 - 11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents