Motorola DS6878 Product Reference Manual page 110

5 - 14 DS6878 Product Reference Guide
Night Mode Trigger
Parameter # 1215
For DS6878-HC units only, manufactured after xx/xx/2013
Enable this to use the trigger to toggle between entering and exiting Night Mode. To toggle, point the scanner away
from a bar code, pull the trigger until the beam goes off, and then continue pulling the trigger for an additional 5
seconds. Note that pulling the trigger an additional 5 seconds after decoding a bar code has no affect.
When entering Night Mode, the pager motor vibrates. When exiting Night Mode, the scanner emits 2 short beeps.
Enable Night Mode Trigger
(1)
*
Disable Night Mode Trigger
(0)
Night Mode Toggle
For DS6878-HC units only, manufactured after xx/xx/2013
To toggle between entering and exiting Night Mode without using the trigger, scan this bar code. This functions
regardless of the state of the Night Mode Trigger parameter.
When scanning this bar code, the Pager Motor vibrates when entering Night Mode, and the scanner emits 2 short
beeps when exiting Night Mode.
Toggle Night Mode