Battery Reconditioning Led Definitions; Inserting The Scanner In The Cradle; Horizontal Cradle Mount; Vertical Cradle Mount - Motorola Symbol LS4278 Product Reference Manual

Battery Reconditioning LED Definitions

Battery Reconditioning LED Definitions
Table 1-1
Battery Reconditioning
Mode
Discharging
Charging
Reconditioning Complete

Inserting the Scanner in the Cradle

Insert the scanner in the cradle so that the metal contacts on the bottom of the scanner handle touch the contacts
on the cradle. Push the handle lightly to ensure a proper connection, engaging the contacts in the cradle and
scanner. Ensure the desk/wall mount converter knob on the back of the cradle is in the correct position for the
horizontal or vertical mounting.

Horizontal Cradle Mount

When mounting the cradle horizontally, where no fastening is necessary:
Ensure the rubber feet are attached to the cradle. These feet provide traction and prevent surface damage.
1.
Ensure the desk/wall mount converter knob is in the position shown in
2.
Desk/Wall Mount
Converter Knob
Horizontal Mount - Inserting the Scanner in the Cradle
Figure 1-8

Vertical Cradle Mount

When mounting the cradle vertically:
Ensure the rubber feet are attached to the cradle. These feet provide traction and prevent surface damage.
1.
Ensure the convertible mount hook on the front of the cradle is inserted with the hook facing up. If not, remove
2.
and reverse the hook so that it is in position to secure the scanner in place. (See
location of the convertible mount hook.)
LED
Red Flash
Green Flash
Green - Solid (always on)
Comments
Time to discharge is approximately 2.5 hours.
Time to charge is approximately 2.5 hours with an
external power supply.
The scanner enters a trickle charge until the scanner is
removed from the cradle.
Figure 1-8.
Figure 1-3 on page 1-4
Getting Started 1 - 11
for the