Prefix/Suffix Values - Motorola DS6878 Product Reference Manual

5 - 48 DS6878 Product Reference Guide

Prefix/Suffix Values

Key Category Parameter # P = 99, S1 = 98, S2 = 100
Decimal Value Parameter # P = 105, S1 = 104, S2 = 106
You can append a prefix and/or one or two suffixes to scan data for use in data editing. To set a value for a
prefix or suffix, scan a four-digit number (i.e., four bar codes from
corresponds to that value. See
When using host commands to set the prefix or suffix, set the key category parameter to 1, then set the 3-digit
decimal value. See
To correct an error or change a selection, scan
NOTE To use Prefix/Suffix values, first set the
Scan Prefix
Scan Suffix 2
Table E on page E-1
Table E on page E-1 for the four-digit codes.
(7)
(8)
Appendix D, Numeric Bar
for the four-digit codes.
Cancel on page D-3.
Scan Data Transmission Format on page 5-49
Scan Suffix 1
Data Format Cancel
Codes) that
.
(6)