4 - 18 DS6878 Product Reference Guide
Reconnect Attempt Beep Feedback
When a digital scanner disconnects as it goes out of range, it immediately attempts to reconnect. While the
digital scanner attempts to reconnect, the green LED continues to blink. If the auto-reconnect process fails, the
digital scanner emits a page timeout beep (long low/long high) and stops blinking the LED. The process can be
restarted by pulling the trigger.
The Beep on Reconnect Attempt feature is disabled by default. When enabled, the digital scanner emits 5
short high beeps every 5 seconds while the reconnection attempt is in progress.Scan a bar code below to
enable or disable Beep on Reconnect Attempt.
*Disable Beep on Reconnect Attempt
Enable Beep on Reconnect Attempt