Unsolicited Heartbeat Interval - Motorola DS6878 Product Reference Manual

5 - 52 DS6878 Product Reference Guide

Unsolicited Heartbeat Interval

Parameter # 1118
The digital scanner supports sending Unsolicited Heartbeat Messages to assist in diagnostics. To enable this
feature and set the desired unsolicited heartbeat interval, scan one of the time interval bar codes below, or
scan Set Another Interval followed by four numeric bar codes from
sequential numbers that correspond to the desired number of seconds).
Scan Disable Unsolicited Heartbeat Interval to turn off the feature.
The heartbeat event is sent as decode data (with no decode beep) in the form of:
MOTEVTHB:nnn
where nnn is a three-digit sequence number starting at 001 and wrapping after 100.
NOTE For proper operation, disable
10 seconds
Set Another Interval
Low Power Mode on page
(10)
Appendix D, Numeric Bar Codes
5-20.
1 minute
(60)
*
Disable Unsolicited Heartbeat Interval
(0)
(scan