Scanning Sequence Examples; Errors While Scanning; Imaging Preferences Parameter Defaults - Motorola DS6878 Product Reference Manual

6 - 2 DS6878 Product Reference Guide

Scanning Sequence Examples

In most cases scanning one bar code sets the parameter value. For example, to disable image capture
illumination, scan the Disable Image Capture Illumination bar code under
page 6-5. The digital scanner issues a fast warble beep and the LED turns green, signifying a successful
parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Imaging Preferences Parameter Defaults

Table 6-1 lists the defaults for imaging preferences parameters. To change the default values, scan the
appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall
the default parameter values, scan the
NOTE See
miscellaneous default parameters.
Imaging Preferences Default Parameters
Table 6-1
Parameter
Imaging Preferences
Operational Modes
Image Capture Illumination
Gain / Exposure Priority for Snapshot
Mode
Snapshot Mode Timeout
Snapshot Aiming Pattern
Image Cropping
Crop to Pixel Addresses
Image Size (Number of Pixels)
Image Brightness (Target White)
JPEG Image Options
JPEG Target File Size
Default Parameters on page
Appendix A, Standard Default Parameters
N/A
361
562
323
300
301
315
316
317
318
302
390
299
561
5-5.
for all user preferences, hosts, symbologies, and
Parameter
Number
N/A
Enable
Autodetect
0 (30 seconds)
Enable
Disable
0 top
0 left
479 bottom
751 right
Full
180
Quality
160 kB
Image Capture Illumination on
Page
Default
Number
6-4
6-5
6-6
6-7
6-7
6-7
6-8
6-9
6-10
6-10
6-11