ICE-‐ENTRY-‐100
10.6
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed Input parameters (IN1 – IN4):
;PIN;
10.7
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed Input filters (ID1 – ID2):
;PID;
10.8
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed direct output links (OD1 – OD3):
;POD;
10.9
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed Input filters (DD1 – DD2):
;PDD;
10.10
By sending this command to ICE-ENTRY-100 you receive SMS message with
programmed SL level:
;PSL;
10.11
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed Outputs parameters (OS1 – OS2):
;POS;
RECEIVE INPUT PARAMETERS (PIN)
RECEIVE INPUT FILTER VALUE (PID)
RECEIVE OUTPUT FILTER VALUE (POD)
RECEIVE DELAY BEFORE DIAL VALUE (PDD)
RECEIVE ACCESS TELEPHONE NUMBERS (PSL)
RECEIVE OUTPUT PARAMETERS (POS)
Page
4 0
INSTALLATION
M
ANUAL