Intercom; Table 15: Message Parameters Example - Transmitter Solutions iCE?Entry?100 Installation Manual

ICE-­‐ENTRY-­‐100
♦ Remote programming by SMS
;#0HOUSE=1;#1KITCHEN=1;

9.7 INTERCOM

Intercom functionality is supported by a set of parameters, used to tweak the
functionality to each user needs.
For each keypad entry ICE-ENTRY-100 incorporates a group of parameters. ICE-
Entry-100 support up to 100 call groups.
9.7.1 KPAx and KPB1 parameters
Parameters are the call numbers for intercom application.
9.7.2 KPTx parameter
Parameter defines the ring time time-out (is seconds). KPTx timer is started when
the dialed telephone starts to ring. If the KPRx timer expires before the GSM voice
connection is established then ICE-ENTRY-100 device calls the next number
(KPBx).
9.7.3 KPOx parameter
Parameter is used to define the output for the selected call group.
9.7.4 KPNx parameter
Parameter is used to redefine the keypad dial number for each call group.
9.7.5 Table of parameters
Name
KPA1
KPB1
KPN1

Table 15: Message parameters example.

Call group 1, Telephone number 1.
Call group 1, Telephone number 2.
Call group 1, keypad dial number .
Page 2 9
Comment
INSTALLATION M ANUAL